home in Pakistan citadel in Iran, the largest adobe building in the world
Adhesive In the
construction industry, mud is a semi-fluid material that can be used to coat, seal, or adhere materials. The term "mud" can be used for various semi-fluid materials used in construction including
slurry,
mortar,
plaster,
stucco, and
concrete. This material was used in a variety of ways to build walls, floors, and even roofs. For thousands of years, it was common in most parts of the world to build walls using
mudbricks or
wattle and daub,
rammed earth, or
cob techniques and to cover the surfaces with earthen plaster.
Mudbrick , Yemen Mud can be made into mud bricks, also called adobe, by mixing mud with water, placing the mixture into
moulds and then allowing it to dry in open air.
Straw is sometimes used as a
binder within the
bricks, as it makes them a
composite. When the brick would otherwise break, the straw will redistribute the force throughout the brick, decreasing the chance of
breakage. Such buildings must be protected from
groundwater, usually by building upon a masonry, fired brick, rock or rubble foundation, and also from wind-driven rain in damp
climates, usually by deep roof overhangs. In extremely dry climates a well-drained flat roof may be protected with a well-prepared (
puddled) and properly maintained dried mud coating, viable as the mud will expand when moistened and so become more water-resistant. Adobe mudbricks were commonly used by the
Pueblo Indians to build their homes and other necessary structures. In some countries there are entire cities made of mud brick houses.
Cow dung and
biomass are added to regulate indoor climate.
Fired brick Mud that is mostly clay, or a mixture of clay and sand may be used for
ceramics, of which one form is the common fired
brick. Fired brick are more durable but consume much more energy to produce.
Stabilized mud Stabilized mud (earth, soil) is mud which has had a binder such as cement or bitumen added. == Pottery ==