Nanorobotics

According to Richard Feynman, it was his former graduate student and collaborator Albert Hibbs who originally suggested to him (circa 1959) the idea of a medical use for Feynman's theoretical micro-machines (see biological machine). Hibbs suggested that certain repair machines might one day be reduced in size to the point that it would, in theory, be possible for a patient to (as Feynman put it) "swallow the surgeon". The idea was incorporated into Feynman's case study 1959 essay ''There's Plenty of Room at the Bottom.'' Since nano-robots would be microscopic in size, it would probably be necessary for very large numbers of them to work together to perform microscopic and macroscopic tasks. These nano-robot swarms, both those unable to replicate (as in utility fog) and those able to replicate unconstrained in the natural environment (as in grey goo and synthetic biology), are found in many science fiction stories, such as the Borg nano-probes in Star Trek and The Outer Limits episode "The New Breed". Some proponents of nano-robotics, in reaction to the grey goo scenarios that they earlier helped to propagate, hold the view that nano-robots able to replicate outside of a restricted factory environment do not form a necessary part of a purported productive nanotechnology, and that the process of self-replication, were it ever to be developed, could be made inherently safe. They further assert that their current plans for developing and using molecular manufacturing do not in fact include free-foraging replicators. A detailed theoretical discussion of nanorobotics, including specific design issues such as sensing, power communication, navigation, manipulation, locomotion, and onboard computation, has been presented in the medical context of nanomedicine by Robert Freitas. Some of these discussions remain at the level of unbuildable generality and do not approach the level of detailed engineering. ==Legal and ethical implications==

Open technology A document with a proposal on nanobiotech development using open design technology methods, as in open-source hardware and open-source software, has been addressed to the United Nations General Assembly. According to the document sent to the United Nations, in the same way that open source has in recent years accelerated the development of computer systems, a similar approach should benefit the society at large and accelerate nanorobotics development. The use of nanobiotechnology should be established as a human heritage for the coming generations, and developed as an open technology based on ethical practices for peaceful purposes. Open technology is stated as a fundamental key for such an aim. Nanorobot race In the same ways that technology research and development drove the space race and nuclear arms race, a race for nanorobots is occurring. There is plenty of ground allowing nanorobots to be included among the emerging technologies. Some of the reasons are that large corporations, such as General Electric, Hewlett-Packard, Synopsys, Northrop Grumman and Siemens have been recently working in the development and research of nanorobots; surgeons are getting involved and starting to propose ways to apply nanorobots for common medical procedures; universities and research institutes were granted funds by government agencies exceeding $2 billion towards research developing nanodevices for medicine; bankers are also strategically investing with the intent to acquire beforehand rights and royalties on future nanorobots commercialisation. Some aspects of nanorobot litigation and related issues linked to monopoly have already arisen. A large number of patents have been granted recently on nanorobots, mostly by patent agents, companies specializing solely on building patent portfolios, and lawyers. After a long series of patents and eventually litigations, see for example the invention of radio, or the war of currents, emerging fields of technology tend to become a monopoly, which normally is dominated by large corporations. ==Approaches to manufacturing ==

Manufacturing nanomachines assembled from molecular components is a very challenging task. Because of the level of difficulty, many engineers and scientists continue working cooperatively across multidisciplinary approaches to achieve breakthroughs in this new area of development. The following techniques are currently applied towards manufacturing nanorobots: Biochip The joint use of nanoelectronics, photolithography, and new biomaterials provides an approach to manufacturing nanorobots for common medical uses, such as surgical instrumentation, diagnosis, and drug delivery. This method for manufacturing on nanotechnology scale is in use in the electronics industry since 2008. So, practical nanorobots should be integrated as nanoelectronics devices, which will allow tele-operation and advanced capabilities for medical instrumentation. Nubots A nucleic acid robot (nubot) is an organic molecular machine at the nanoscale. DNA structure can provide means to assemble 2D and 3D nanomechanical devices. DNA based machines can be activated using small molecules, proteins and other molecules of DNA. Biological circuit gates based on DNA materials have been engineered as molecular machines to allow in-vitro drug delivery for targeted health problems. Such material based systems would work most closely to smart biomaterial drug system delivery, while not allowing precise in vivo teleoperation of such engineered prototypes. Surface-bound systems Several reports show the attachment of synthetic molecular motors to surfaces. These primitive nanomachines have been shown to undergo machine-like motions when confined to the surface of a macroscopic material. The surface anchored motors could potentially be used to move and position nanoscale materials on a surface in the manner of a conveyor belt. Positional nanoassembly Nanofactory Collaboration, founded by Robert Freitas and Ralph Merkle in 2000 and involving 23 researchers from 10 organizations and 4 countries, focuses on developing a practical research agenda specifically aimed at developing positionally-controlled diamond mechanosynthesis and a diamondoid nanofactory that would have the capability of building diamondoid medical nanorobots. Biohybrids The emerging field of bio-hybrid systems combines biological and synthetic structural elements for biomedical or robotic applications. The constituent elements of bio-nanoelectromechanical systems (BioNEMS) are of nanoscale size, for example DNA, proteins or nanostructured mechanical parts. Thiol-ene e-beams resist allow the direct writing of nanoscale features, followed by the functionalization of the natively reactive resist surface with biomolecules. Other approaches use a biodegradable material attached to magnetic particles that allow them to be guided around the body. Bacteria-based This approach uses biological microorganisms, like the bacterium Escherichia coli and Salmonella typhimurium. Thus the model uses a flagellum for propulsion purposes. Electromagnetic fields normally control the motion of this kind of biological integrated device. Chemists at the University of Nebraska have created a humidity gauge by fusing a bacterium to a silicon computer chip. Virus-based Retroviruses can be used to attach to cells and replace DNA. They go through a process called reverse transcription to deliver genetic packaging in a vector. Usually, these devices are Pol – Gag genes of the virus for the Capsid and Delivery system. This process is called retroviral gene therapy, having the ability to re-engineer cellular DNA by usage of viral vectors. This approach has appeared in the form of retroviral, adenoviral, and lentiviral gene delivery systems. These gene therapy vectors have been used in cats to send genes into the genetically modified organism (GMO), causing it to display the trait. ==Magnetic helical nanorobots==

Research led to the creation of helical silica particles coated with magnetic materials that can be maneuvered using a rotating magnetic field. Such nanorobots are not dependent on chemical reactions to fuel the propulsion. A triaxial Helmholtz coil can provide directed rotating field in space. It was shown how such nanomotors can be used to measure viscosity of non-newtonian fluids at a resolution of a few microns. This technology promises creation of a viscosity map inside cells and the extracellular milieu. Such nanorobots move in blood. Researchers have managed to controllably move such nanorobots inside cancer cells allowing them to trace out patterns inside a cell. Summary of helical nanorobots A magnetic helical nanorobot consists of at least two components - one being a helical body, and the other being a magnetic material. The helical body provides a structure to the nanorobot capable of translation along the helical axis. The magnetic material, on the other hand, allows the structure to rotate by following an externally applied rotating magnetic field. Helical nanorobots use magnetic actuation and helical propulsion methods. Magnetic helical nanorobots translate a rotational motion into translational movement through a fluid in low Reynolds number environments. These nanorobots have been inspired by naturally occurring microorganisms such as flagella, cilia, and Escheric coli (otherwise known as E. coli) which rotate in a helical wave. Movement of magnetic helical nanorobots One approach to the wireless manipulation of helical swimmers is through externally applied gradient rotation magnetic field. This can be done through Helmholtz coil as the helical swimmers are actuated by a rotating magnetic field. All magnetized objects within an externally imposed magnetic field will have both forces and torques exerted on them. The helical swimmers can rotate due the magnetic field received by the magnetic head and the forces acting upon it. Once the whole structure feels the field then the helical shape of its body converts this rotational movement into a propulsive force. Magnetic forces (fm) are proportional to the gradient of the magnetic field (∇B) on the magnetized object, and act to move the object to local maxima. Also, magnetic torques (τ) are proportional to the magnetic field (B) and act to align the internal magnetization of an object (M) with the field. The equations that express the interactions are as follows where V is the volume of the magnetized object. \boldsymbol{F} = V \cdot (\boldsymbol{M} \cdot \nabla \boldsymbol{B}) (Equation 1) \boldsymbol{\tau} = V \cdot (\boldsymbol{M} \boldsymbol{\times} \boldsymbol{B}) (Equation 2) Equation one indicates that, increasing the volume of the magnetic material will increase the force experienced by the material proportionally. If the volume is doubled, the force will also double, assuming the magnetization (M) and the gradient of the magnetic field (∇B) remain constant. This would be the same for the torque of the magnetic material too since it is proportional to the volume. This increase in magnetic dipoles enhances the overall magnetic response of the material to an external magnetic field, resulting in greater force and torque. Hence when the magnetic material gets bigger than the helical swimmer it can move faster. Movement of a helical swimmer with square magnetic head To use the rotation magnetic field, a permanent magnet can be planted in the helical swimmer's head, whose magnetization direction would be perpendicular to the swimmer body. When a rotating magnetic field is applied, the swimmer's head experiences a magnetic torque, causing it to rotate. The helical shape converts this rotational movement into a propulsive force. As the swimmer's head rotates, its helical tail generates a force against the surrounding fluid, propelling it forward. According to equation 2, the magnetic torque around the x-axis is zero (\boldsymbol{M} \boldsymbol{\times} \boldsymbol{B})*\boldsymbol{ux} = 0 at the initial position. After the magnet manipulator turns 45°, the magnetic field near the head position of the square magnet turns at an angle around the x-axis, as shown in the figure below. If the square magnet stays in its initial position, it will be subject to a magnetic torque around the x-axis (\boldsymbol{M} \boldsymbol{\times} \boldsymbol{B})*\boldsymbol{ux} \neq 0 Thus, the helical swimmer will follow the magnetic field. If the magnet manipulator rotates one turn, the magnetic field near the head position of the swimmer projected on the plane yoz rotates a whole turn around the x-axis. This results in the helical shape to move, resulting in propulsion as follows: i_{push} = \sin{\varphi_{in}} \sin{\theta_{in}} \cos{\varphi_{in}} \cos{\theta_{in}} \cos{\varphi_{in}} This propulsion helps the helical structure to rotate with the angle of the force. As a result, the magnetic robot rotates around the x-axis by the action of the rotating magnetic field. Example biomedical applications Due to its small scale and helical shape providing propulsion, helical swimmers can be used in some biomedical applications such as; targeted drug delivery and targeted cell delivery. In 2018, there was a proposed biocompatible and biodegradable chistosan-based helical micro/nanoswimmer loaded with doxorubicin (DOX), a common anticancer drug that was designed to deliver its payload to a desired location. Using 3.4 × 10–1 W/cm2 intensity UV light radiation, when the swimmer approached the target location, a dose of 60% of the total DOX was released within 5 minutes. However, it was seen that the dosage release rate slowed down after the initial 5 minutes that were reported. This was theorized to be caused by a decreasing diffusion rate of DOX molecules coming from the center of the swimmer. Another group's spirulina-based helical micro/nanoswimmer also carrying DOX used a different method for controlled drug release. Once the swimmer had reached its destination, near-infrared (NIR) laser irradiation was used to heat up the location to dissolve the swimmer into individual particles, releasing the drug in the process. Through multiple tests, it was found that weak acidic external environments led to an increase in the dosage release rate. Using magnetic helical micro/nanorobots for cell transport can also lead to opportunities in solving male infertility, repairing damaged tissue, and cell assembly. In 2015, a helical micro-/nanomotor with a holding ring on the head was used to successfully capture and transport sperm cells with motion deficiencies. The helix device would approach the sperm cell's tail and confine it with the body of the micro-/nanomotor. It would then use the holding ring to loosely capture the head of the sperm cell to prevent escape. After reaching the target location, the sperm cell would be released into the membrane of the oocyte by reversing the rotation of the helix device. This strategy was considered to be an efficient strategy while also reducing risk of damage to the sperm cells. 3D printing 3D printing is the process by which a three-dimensional structure is built through the various processes of additive manufacturing. Nanoscale 3D printing involves many of the same process, incorporated at a much smaller scale. To print a structure in the 5-400 μm scale, the precision of the 3D printing machine needs to be improved greatly. A two-step process of 3D printing, using a 3D printing and laser etched plates method was incorporated as an improvement technique. To be more precise at a nanoscale, the 3D printing process uses a laser etching machine, which etches the details needed for the segments of nanorobots into each plate. The plate is then transferred to the 3D printer, which fills the etched regions with the desired nanoparticle. The 3D printing process is repeated until the nanorobot is built from the bottom up. This 3D printing process has many benefits. First, it increases the overall accuracy of the printing process. Second, it has the potential to create functional segments of a nanorobot. == Challenges in designing nanorobots ==

Several challenges must be addressed when designing and building nanoscale machines with movable parts. The most obvious is the need to develop very fine tools and manipulation techniques capable of assembling individual nanostructures with high precision into an operational device. A less evident challenge relates to the peculiarities of adhesion and friction at the nanoscale. It is impossible to simply scale down the design of a macroscopic device with movable parts. This approach will not work because the high surface energy of nanostructures causes all contacting parts to stick together to minimize energy. The adhesion and static friction between parts can easily exceed the strength of the materials, causing them to break before any movement occurs. This necessitates designing movable structures with minimal contact area. In spite of the fast development of nanorobots, those designed for drug delivery purposes have "a long way to go before their commercialization and clinical applications can be achieved." ==Potential uses==

Nanomedicine Potential uses for nanorobotics in medicine include early diagnosis and targeted drug-delivery for cancer, biomedical instrumentation, surgery, pharmacokinetics, and health care. In such plans, future medical nanotechnology is expected to employ nanorobots injected into the patient to perform work at a cellular level. Such nanorobots intended for use in medicine should be non-replicating, as replication would needlessly increase device complexity, reduce reliability, and interfere with the medical mission. Nanotechnology provides a wide range of new technologies for developing customized means to optimize the delivery of pharmaceutical drugs. Today, harmful side effects of treatments such as chemotherapy are commonly a result of drug delivery methods that don't pinpoint their intended target cells accurately. This directed method of drug delivery has great potential for treating cancer patients while avoiding negative effects (commonly associated with improper drug delivery). The first demonstration of nanomotors operating in living organisms was carried out in 2014 at University of California, San Diego. MRI-guided nanocapsules are one potential precursor to nanorobots. Another useful application of nanorobots is assisting in the repair of tissue cells alongside white blood cells. Recruiting inflammatory cells or white blood cells (which include neutrophil granulocytes, lymphocytes, monocytes, and mast cells) to the affected area is the first response of tissues to injury. Because of their small size, nanorobots could attach themselves to the surface of recruited white cells, to squeeze their way out through the walls of blood vessels and arrive at the injury site, where they can assist in the tissue repair process. Certain substances could possibly be used to accelerate the recovery. The science behind this mechanism is quite complex. Passage of cells across the blood endothelium, a process known as transmigration, is a mechanism involving engagement of cell surface receptors to adhesion molecules, active force exertion and dilation of the vessel walls and physical deformation of the migrating cells. By attaching themselves to migrating inflammatory cells, the robots can in effect "hitch a ride" across the blood vessels, bypassing the need for a complex transmigration mechanism of their own. Nanocomposite particles that are controlled remotely by an electromagnetic field was also developed. This series of nanorobots that are now enlisted in the Guinness World Records, Scientists suggest that this technology can be used for the treatment of cancer. Magnetic nanorobots have demonstrated capabilities to prevent and treat antimicrobial resistant bacteria. Application of nanomotor implants have been proposed to achieve thorough disinfection of the dentine.{{Cite news|url=https://medicalxpress.com/news/2022-05-tiny-bots-deep-teeth.html Cultural references The Nanites are characters on the TV show Mystery Science Theater 3000. They're self-replicating, bio-engineered organisms that work on the ship and reside in the SOL's computer systems. They made their first appearance in Season 8. Nanites are used in a number of episodes in the television series Travelers. They be programmed and injected into injured people to perform repairs, and first appear in season 1. Nanites also feature in the Rise of Iron 2016 expansion for the video game Destiny in which SIVA, a self-replicating nanotechnology is used as a weapon. Nanites (referred to more often as nanomachines) are often referenced in Konami's Metal Gear series, being used to enhance and regulate abilities and body functions. In the Star Trek franchise TV shows nanites play an important plot device. Starting with "Evolution" in the third season of The Next Generation, Borg Nanoprobes perform the function of maintaining the Borg cybernetic systems, as well as repairing damage to the organic parts of a Borg. They generate new technology inside a Borg when needed, as well as protecting them from many forms of disease. Nanites play a role in the Deus Ex video game series, being the basis of the nano-augmentation technology which gives augmented people superhuman abilities. Nanites are also mentioned in the Arc of a Scythe book series by Neal Shusterman and are used to heal all nonfatal injuries, regulate bodily functions, and considerably lessen pain. Nanites are also an integral part of Stargate SG1 and Stargate Atlantis, where grey goo scenarios are portrayed. Nanomachines are central to the plot of the Silo book series, in which they are used as a weapon of mass destruction propagated via the air, and enter undetected into the human body where, when receiving a signal, they kill the recipient. They are then used to wipe out the majority of the human race. ==See also==