R110B (New York City Subway car)

The R110B cars were ordered from Bombardier in December 1989. The R110B was designed to test various new technology features that would eventually be incorporated into the R143 and were not intended for long-term production use. There were nine R110B cars, numbered 3001–3009. The cars were linked into three-car sets by consecutive numbers. The cab cars are powered with four traction motors each, while the center car of the 3-car set is an unpowered, cab-less trailer. The cars are typical B-Division size, except that they are 67 feet long, a length shared by the BMT Standards and the SIRT ME-1s. The R110B uses the standard subway train control stand, but with some added computerized features. The layout of the controls is desk-style, with switches, lamps, and a single lever to control traction and braking. A CRT with function keys on either side is used to monitor speed, train status, etc. The R110B's design is similar to that of the R68 cars now in use on the BMT and IND services, but the ends are more square and use Lexan glass in the windows. Car ends that do not have cabs have an expanse of glass. The seating configuration is the same as in the R68, but the materials are more advanced. A matte plastic is used that allows scratches, tags, and stubborn graffiti to be buffed out using a light abrasive. The seats have a reduced bucket. Internal surfaces are tan fiberglass and plastic, with either fully kale wall accents and seating with textured raised square linoleum floor patterns found on cars 3001–3006, or white speckled walls and seating with blue accenting on the bottom, including smooth non-textured floor panels found on cars 3007–3009. The walls have accents provided using a plastic mosaic applique as well. The R110B cars have handholds for shorter passengers, inherited by older retired R12 and R14 subway cars as a retrofit. Some cars have had their flooring replaced in the majority of the car toward the end of their short service life. There are rollsign line indicators in the front of the train, LCD destination signs (on windows) and interior strip route guides on top of the ad space, and an LED indication of stops ahead on both sides. Rollsigns were not used on the subsequent New Technology Train orders; however, the R211 order is equipped with front LED signs that are similar to rollsign-equipped trains. Another new and important feature was the passenger intercom, which could be used for emergencies. ==History==

car During the 1970s and 1980s, the Metropolitan Transportation Authority (MTA) had made several large orders for subway cars, such as the R46, which had new components added to them. However, because there was not a prototype built first for testing, many expensive retrofits were required. The MTA was in the process of creating the first technologically advanced subway car since the R44 in the early 1970s. In order to avoid the aforementioned problem, in 1989, the MTA awarded contracts for two prototype test trains, one of which was the R110A (contract R130) for the A Division built by Kawasaki Heavy Industries, and the R110B (contract R131) for the B Division built by Bombardier Transportation. These two fleets were called the New Technology Test Trains (NTTTs) and would test features that would be implemented on future mass-production orders, specifically the New Technology Trains. The R110B tested new technology, including AC propulsion with regeneration, microprocessor-controlled doors and brakes, roof-mounted hermetic air-conditioning units, and fabricated trucks with air bags suspension. Passenger emergency intercoms for contacting train crews, passenger alarm strips to press in case of an emergency, improved lighting, glass to see into the next cars and the platform, and computerized announcements were all implemented. The cars have been sent to various locations throughout New York City since 2004. Car 3007 was cosmetically restored and placed in the New York Transit Museum in February 2025. The remaining cars are in the following locations: • 3001 – sent off to College Point, Queens in early 2014 for use as a training car for the NYPD. Part of the car was cut away to allow the car to fit in the building. • 3004 and 3006 – used as training cars at the Coney Island Yard's firefighting facility, since August 2004. These cars replaced R30s 8392 and 8401. • 3005 – used as a training car at P.S. 248, the New York City Transit Learning Center, since July 15, 2004. This car replaced R16 6452. • 3008 – spotted in late August 2015 near FDNY's Randall's Island training facility. • 3002, 3003, and 3009 – currently stored at the 207th Street Yard. Plans are unknown for these cars. == References ==