Global greenhouse gas emissions can be attributed to different
sectors of the economy. This provides a picture of the varying contributions of different types of economic activity to climate change, and helps in understanding the changes required to
mitigate climate change. Greenhouse gas emissions can be divided into those that arise from the combustion of fuels to produce energy, and those generated by other processes. Around two thirds of greenhouse gas emissions arise from the combustion of fuels. Energy may be produced at the point of
consumption, or by a generator for consumption by others. Thus emissions arising from energy production may be categorized according to where they are emitted, or where the resulting energy is consumed. If emissions are attributed at the point of production, then electricity generators contribute about 25% of global greenhouse gas emissions. If these emissions are attributed to the final consumer then 24% of total emissions arise from manufacturing and construction, 17% from transportation, 11% from domestic consumers, and 7% from commercial consumers. Around 4% of emissions arise from the energy consumed by the energy and fuel industry itself. The remaining third of emissions arise from processes other than energy production. 12% of total emissions arise from agriculture, 7% from land use change and forestry, 6% from industrial processes, and 3% from waste.
Coal-fired power stations are the single largest emitter, with over 20% of global greenhouse gas emissions in 2018. Although much less polluting than coal plants, natural
gas-fired power plants are also major emitters, taking electricity generation as a whole over 25% in 2018. Notably, just 5% of the world's power plants account for almost three-quarters of carbon emissions from electricity generation, based on an inventory of more than 29,000 fossil-fuel power plants across 221 countries. In the 2022 IPCC report, it is noted that providing modern energy services universally would only increase greenhouse gas emissions by a few percent at most. This slight increase means that the additional energy demand that comes from supporting decent living standards for all would be far lower than current average energy consumption. In March 2024, the
International Energy Agency (IEA) reported that in 2023, global emissions from energy sources increased by 1.1%, rising by 410 million tonnes to a record 37.4 billion tonnes, primarily due to coal. Drought-related decreases in hydropower contributed to a 170 million tonne rise in emissions, which would have otherwise led to a decrease in the electricity sector's emissions. The implementation of
clean energy technologies like
solar,
wind, nuclear,
heat pumps, and
electric vehicles since 2019 has significantly tempered emissions growth, which would have been threefold without these technologies. Deforestation is a major source of greenhouse gas emissions. A study shows annual carbon emissions (or carbon loss) from tropical deforestation have doubled during the last two decades and continue to increase. (0.97 ±0.16 PgC per year in 2001–2005 to 1.99 ±0.13 PgC per year in 2015–2019) Accounting for land-use change can be understood as an attempt to measure "net" emissions, i.e., gross emissions from all sources minus the removal of emissions from the atmosphere by carbon sinks. Additionally, there is controversy over how carbon sinks should be allocated between different regions and over time.
Transport of people and goods Transportation accounts for 15% of emissions worldwide. Over a quarter of global transport emissions are from road freight, so many countries are further restricting
truck emissions to help limit climate change.
Maritime transport accounts for 3.5% to 4% of all greenhouse gas emissions, primarily carbon dioxide. In 2022, the shipping industry's 3% of global greenhouse gas emissions made it "the sixth largest greenhouse gas emitter worldwide, ranking between Japan and Germany."
Aviation Jet airliners contribute to climate change by emitting carbon dioxide (), nitrogen oxides,
contrails and particulates.In 2018, global commercial operations generated 2.4% of all emissions. In 2020, approximately 3.5% of the overall human impacts on climate are from the aviation sector. The impact of the sector on climate in the last 20 years had doubled, but the part of the contribution of the sector in comparison to other sectors did not change because other sectors grew as well. Some representative figures for average direct emissions (not accounting for high-altitude radiative effects) of airliners expressed as and equivalent per passenger kilometer: • Domestic, short distance, less than : 257 g/km or 259 g/km (14.7 oz/mile) e • Long-distance flights: 113 g/km or 114 g/km (6.5 oz/mile) e
Buildings and construction In 2018, manufacturing construction materials and maintaining buildings accounted for 39% of carbon dioxide emissions from energy and process-related emissions. Manufacture of glass, cement, and steel accounted for 11% of energy and process-related emissions. Because building construction is a significant investment, more than two-thirds of buildings in existence will still exist in 2050.
Retrofitting existing buildings to become more efficient will be necessary to meet the targets of the Paris Agreement; it will be insufficient to only apply low-emission standards to new construction. Buildings that produce as much energy as they consume are called
zero-energy buildings, while buildings that produce more than they consume are
energy-plus.
Low-energy buildings are designed to be highly efficient with low total energy consumption and carbon emissions—a popular type is the
passive house.
Green building practices that avoid emissions or capture the carbon already present in the environment, allow for reduced footprint of the construction industry, for example, use of
hempcrete,
cellulose fiber insulation, and
landscaping. In 2019, the building sector was responsible for 12 Gt-eq emissions. More than 95% of these emissions were carbon, and the remaining 5% were CH4, , and halocarbon. The largest contributor to building sector emissions (49% of total) is the production of electricity for use in buildings. Of global building sector GHG emissions, 28% are produced during the manufacturing process of building materials such as
steel,
cement (a key component of
concrete), and glass. The remaining 23% of global building sector GHG emissions are produced directly on site during building operations. As of 2018, "Embodied carbon is responsible 11% of global greenhouse gas emissions and 28% of global building sector emissions ... Embodied carbon will be responsible for almost half of total new construction emissions between now and 2050." GHG emissions which are produced during the mining, processing, manufacturing, transportation and installation of building materials are referred to as the
embodied carbon of a material. The embodied carbon of a construction project can be reduced by using low-carbon materials for building structures and finishes, reducing demolition, and reusing buildings and construction materials whenever possible.
Mining Flaring and venting of
natural gas in oil wells is a significant source of greenhouse gas emissions. Its contribution to greenhouse gases has declined by three-quarters in absolute terms since a peak in the 1970s of approximately 110 million metric tons/year, and in 2004 accounted for about 1/2 of one percent of all anthropogenic carbon dioxide emissions. The
World Bank estimates that 134 billion cubic meters of natural gas are flared or vented annually (2010 datum), an amount equivalent to the combined annual gas consumption of
Germany and
France or enough to supply the entire world with gas for 16 days. This flaring is highly concentrated: 10 countries account for 70% of emissions, and twenty for 85%.
Steel and aluminum Steel and aluminum are key economic sectors where is produced. According to a 2013 study, "in 2004, the steel industry along emits about 590M tons of , which accounts for 5.2% of the global anthropogenic GHG emissions. emitted from steel production primarily comes from energy consumption of fossil fuel as well as the use of
limestone to purify
iron oxides." More recent estimates suggest that global steel production emitted around 2,280 million tons of CO2 in 2017, indicating the scale has increased significantly. A 2022 study found that across bulk material sectors—steel, aluminum, cement, and paper—total emissions reached approximately 8.4 billion tons of CO2 equivalent.
Plastics Plastics are produced mainly from fossil fuels. It was estimated that between 3% and 4% of global GHG emissions are associated with plastics' life cycles. The EPA estimates as many as five mass units of carbon dioxide are emitted for each mass unit of
polyethylene terephthalate (PET) produced—the type of plastic most commonly used for beverage bottles, the transportation produce greenhouse gases also.
Plastic waste emits carbon dioxide when it degrades. In 2018 research claimed that some of the most common plastics in the environment release the greenhouse gases methane and
ethylene when exposed to sunlight in an amount that can affect the earth climate. Due to the lightness of plastic versus glass or metal, plastic may reduce energy consumption. For example, packaging beverages in PET plastic rather than glass or metal is estimated to save 52% in transportation energy, if the glass or metal package is
single-use, of course. In 2019 a new report "Plastic and Climate" was published. According to the report, the production and incineration of plastics will contribute in the equivalent of 850 million tonnes of
carbon dioxide () to the atmosphere in 2019. With the current trend, annual life cycle greenhouse gas emissions of plastics will grow to 1.34 billion tonnes by 2030. By 2050, the life cycle emissions of plastics could reach 56 billion tonnes, as much as 14 percent of the Earth's remaining
carbon budget. The report says that only solutions which involve a
reduction in consumption can solve the problem, while others like biodegradable plastic, ocean cleanup, using renewable energy in plastic industry can do little, and in some cases may even worsen it.
Pulp and paper The global print and paper industry accounts for about 1% of global carbon dioxide emissions. Greenhouse gas emissions from the
pulp and paper industry are generated from the combustion of fossil fuels required for raw material production and transportation, wastewater treatment facilities, purchased power, paper transportation, printed product transportation, disposal and recycling.
Various services Digital services In 2020,
data centers (excluding cryptocurrency mining) and data transmission each used about 1% of world electricity. The
digital sector produces between 2% and 4% of global GHG emissions, a large part of which is from
chipmaking. However the sector reduces emissions from other sectors which have a larger global share, such as transport of people, and possibly buildings and industry. Mining for
proof-of-work cryptocurrencies requires enormous amounts of electricity and consequently comes with a large
carbon footprint. Proof-of-work blockchains such as
Bitcoin,
Ethereum,
Litecoin, and
Monero were estimated to have added between 3 million and 15 million tonnes of carbon dioxide () to the atmosphere in the period from 1 January 2016 to 30 June 2017. By the end of 2021, Bitcoin was estimated to produce 65.4 million tonnes of , as much as
Greece, and consume between 91 and 177 terawatt-hours annually (0.3% to 0.6% of world electricity). Bitcoin is the least energy-efficient cryptocurrency, using 707.6 kilowatt-hours of electricity per transaction. A study in 2015 investigated the global electricity usage that can be ascribed to
Communication Technology (CT) between 2010 and 2030. Electricity usage from CT was divided into four principle categories: (i) consumer devices, including personal computers, mobile phones, TVs and home entertainment systems; (ii) network infrastructure; (iii) data center computation and storage; and lastly (iv) production of the above categories. The study estimated for the worst-case scenario, that CT electricity usage could contribute up to 23% of the globally released greenhouse gas emissions in 2030.
Health care The healthcare sector produces 4.4–4.6% of global greenhouse gas emissions. Based on the 2013 life cycle emissions in the health care sector, it is estimated that the GHG emissions associated with US health care activities may cause an additional 123,000 to 381,000 DALYs annually.
Water supply and sanitation Tourism According to UNEP, global tourism is a significant contributor to the increasing concentrations of greenhouse gases in the atmosphere, with air travel accounting for a substantial share of tourism's carbon footprint—up to 70% in some countries like Iceland. Recent studies show that tourism produces around 1 kg of CO2 per dollar spent—about 25% higher than the global economic average—highlighting its substantial carbon intensity. == Emissions by other characteristics ==