Liquid Ethanol Biologically produced
alcohols, most commonly ethanol, and less commonly
propanol and
butanol, are produced by the action of
microorganisms and
enzymes through the fermentation of sugars or starches (easiest to produce) or cellulose (more difficult to produce). The IEA estimates that ethanol production used 20% of sugar supplies and 13% of corn supplies in 2021. Ethanol fuel is the most common biofuel worldwide, particularly
in Brazil.
Alcohol fuels are produced by fermentation of sugars derived from
wheat,
corn,
sugar beets,
sugar cane,
molasses and any sugar or starch from which
alcoholic beverages such as
whiskey, can be made (such as
potato and
fruit waste, etc.). Production methods used are
enzyme digestion (to release sugars from stored starches), fermentation of the sugars,
distillation and drying. The distillation process requires significant energy input to generate heat. Heat is sometimes generated with unsustainable
natural gas fossil fuel, but cellulosic biomass such as
bagasse is the most common fuel in Brazil, while pellets, wood chips and also
waste heat are more common in Europe. Corn-to-ethanol and other food stocks has led to the development of
cellulosic ethanol. Ethanol fuel can be combined with gasoline to create a more environmentally friendly fuel though there are more viable substitutions to gasoline such as
Butanol.
Other biofuels Methanol is currently produced from
natural gas, a
non-renewable fossil fuel. In the future it is hoped to be produced from biomass as
biomethanol. This is technically feasible, but the production is currently being postponed for concerns that the economic viability is still pending. The
methanol economy is an alternative to the
hydrogen economy to be contrasted with today's
hydrogen production from natural gas.
Butanol () is formed by
ABE fermentation (acetone, butanol, ethanol) and experimental modifications of the process show potentially high
net energy gains with
biobutanol as the only liquid product. Biobutanol is often claimed to provide a direct replacement for gasoline, because it will produce more energy than ethanol and allegedly can be burned "straight" in existing gasoline engines (without modification to the engine or car), is less corrosive and less water-soluble than ethanol, and could be distributed via existing infrastructures.
Escherichia coli strains have also been successfully engineered to produce butanol by modifying their
amino acid metabolism. One drawback to butanol production in
E. coli remains the high cost of
nutrient rich media, however, recent work has demonstrated
E. coli can produce butanol with minimal nutritional supplementation. Biobutanol is sometimes called
biogasoline, which is incorrect as it is chemically different, being an alcohol and not a hydrocarbon like gasoline.
Biodiesel Biodiesel is the most common biofuel in Europe. It is produced from oils or fats using
transesterification and is a liquid similar in composition to fossil/mineral diesel. Chemically, it consists mostly of fatty acid methyl (or ethyl) esters (
FAMEs). Feedstocks for biodiesel include animal fats, vegetable oils,
soy,
rapeseed,
jatropha,
mahua,
mustard,
flax,
sunflower,
palm oil,
hemp,
field pennycress,
Pongamia pinnata and
algae. Pure biodiesel (B100, also known as "neat" biodiesel) currently reduces emissions with up to 60% compared to diesel Second generation B100. , researchers at Australia's
CSIRO have been studying
safflower oil as an engine
lubricant, and researchers at
Montana State University's Advanced Fuels Center in the US have been studying the oil's performance in a large
diesel engine, with results described as a "breakthrough". Biodiesel can be used in any diesel engine and modified equipment when mixed with mineral diesel. It can also be used in its pure form (B100) in diesel engines, but some maintenance and performance problems may occur during wintertime utilization, since the fuel becomes somewhat more
viscous at lower temperatures, depending on the feedstock used. Electronically controlled '
common rail' and '
Unit Injector' type systems from the late 1990s onwards can only use biodiesel blended with conventional diesel fuel. These engines have finely metered and atomized multiple-stage injection systems that are very sensitive to the viscosity of the fuel. Many current-generation diesel engines are designed to run on B100 without altering the engine itself, although this depends on the
fuel rail design. Since biodiesel is an effective
solvent and cleans residues deposited by mineral diesel,
engine filters may need to be replaced more often, as the biofuel dissolves old deposits in the fuel tank and pipes. It also effectively cleans the engine
combustion chamber of carbon deposits, helping to maintain efficiency. Biodiesel is an
oxygenated fuel, meaning it contains a reduced amount of carbon and higher hydrogen and oxygen content than fossil diesel. This improves the
combustion of biodiesel and reduces the particulate emissions from unburnt carbon. However, using pure biodiesel may increase NOx-emissions Biodiesel is also safe to handle and transport because it is non-toxic and
biodegradable, and has a high
flash point of about 300 °F (148 °C) compared to petroleum diesel fuel, which has a flash point of 125 °F (52 °C). In many European countries, a 5% biodiesel blend is widely used and is available at thousands of gas stations. In France, biodiesel is incorporated at a rate of 8% in the fuel used by all French diesel vehicles.
Avril Group produces under the brand
Diester, a fifth of 11 million tons of biodiesel consumed annually by the
European Union. It is the leading European producer of biodiesel. Recently, it is produced using series of thermochemical processes such as pyrolysis and hydroprocessing. In the thermochemical route, syngas produced from gasification, bio-oil produced from pyrolysis or biocrude produced from hydrothermal liquefaction is upgraded to green diesel using hydroprocessing. Hydroprocessing is the process of using hydrogen to reform a molecular structure. For example,
hydrocracking which is a widely used hydroprocessing technique in refineries is used at elevated temperatures and pressure in the presence of a catalyst to break down larger
molecules, such as those found in
vegetable oils, into shorter
hydrocarbon chains used in
diesel engines. Green diesel may also be called renewable diesel, drop-in biodiesel, hydrotreated vegetable oil (HVO fuel) It does not require new engines, pipelines or infrastructure to distribute and use, but has not been produced at a cost that is competitive with
petroleum. Green diesel is being developed in
Louisiana and
Singapore by
ConocoPhillips,
Neste Oil,
Valero, Dynamic Fuels, and
Honeywell UOP as well as Preem in Gothenburg, Sweden, creating what is known as Evolution Diesel.
Straight vegetable oil Straight unmodified
edible vegetable oil is generally not used as fuel, but lower-quality oil has been used for this purpose. Used vegetable oil is increasingly being processed into biodiesel, or (more rarely) cleaned of water and particulates and then used as a fuel. The IEA estimates that biodiesel production used 17% of global vegetable oil supplies in 2021. The resulting product is a straight-chain hydrocarbon with a high
cetane number, low in
aromatics and
sulfur and does not contain oxygen.
Hydrogenated oils can be blended with diesel in all proportions. They have several advantages over biodiesel, including good performance at low temperatures, no storage stability problems and no susceptibility to microbial attack.
Biogasoline Biogasoline can be produced biologically and thermochemically. Using biological methods, a study led by Professor Lee Sang-yup at the Korea Advanced Institute of Science and Technology (
KAIST) and published in the international science journal
Nature used modified
E. coli fed with glucose found in plants or other non-food crops to produce biogasoline with the produced enzymes. The enzymes converted the sugar into fatty acids and then turned these into hydrocarbons that were chemically and structurally identical to those found in commercial gasoline fuel. The thermochemical approach of producing biogasoline are similar to those used to produce biodiesel. Bioethers are created from wheat or sugar beets, and also be produced from the waste glycerol that results from the production of biodiesel. They also enhance
engine performance, while significantly reducing engine wear and
toxic exhaust emissions. By greatly reducing the amount of ground-level
ozone emissions, they contribute to improved air quality. In transportation fuel there are six ether additives: dimethyl ether (DME),
diethyl ether (DEE),
methyl tert-butyl ether (MTBE),
ethyl tert-butyl ether (ETBE),
tert-amyl methyl ether (TAME), and
tert-amyl ethyl ether (TAEE). The European Fuel Oxygenates Association identifies MTBE and ETBE as the most commonly used ethers in fuel to replace
lead. Ethers were introduced in Europe in the 1970s to replace the highly toxic compound. Although Europeans still use bioether additives, the U.S.
Energy Policy Act of 2005 lifted a requirement for
reformulated gasoline to include an oxygenate, leading to less MTBE being added to fuel. Although bioethers are likely to replace ethers produced from petroleum in the UK, it is highly unlikely they will become a fuel in and of itself due to the low energy density.
Aviation biofuel Gaseous Biogas and biomethane Biogas is a mixture composed primarily of
methane and
carbon dioxide produced by the process of
anaerobic digestion of
organic material by
micro-organisms. Other trace components of this mixture includes water vapor,
hydrogen sulfide, siloxanes, hydrocarbons, ammonia, oxygen, carbon monoxide, and nitrogen. It can be produced either from
biodegradable waste materials or by the use of
energy crops fed into
anaerobic digesters to supplement gas yields. The solid byproduct,
digestate, can be used as a biofuel or a fertilizer. When and other impurities are removed from biogas, it is called
biomethane. The can also be combined with hydrogen in
methanation to form more methane. Biogas can be recovered from
mechanical biological treatment waste processing systems.
Landfill gas, a less clean form of biogas, is produced in
landfills through naturally occurring anaerobic digestion. If it escapes into the atmosphere, it acts as a
greenhouse gas. In Sweden, "
waste-to-energy" power plants capture methane biogas from garbage and use it to power transport systems. Farmers can produce biogas from cattle
manure via anaerobic digesters.
Syngas Syngas, a mixture of
carbon monoxide,
hydrogen and various hydrocarbons, is produced by partial combustion of biomass (combustion with an amount of
oxygen that is not sufficient to convert the biomass completely to carbon dioxide and water). The
wood gas generator, a wood-fueled gasification reactor, can be connected to an internal combustion engine. Syngas can be used to produce
methanol,
dimethyl ether and
hydrogen, or converted via the
Fischer–Tropsch process to produce a diesel substitute, or a mixture of alcohols that can be blended into gasoline. Gasification normally relies on temperatures greater than 700 °C. Lower-temperature gasification is desirable when co-producing
biochar, but results in syngas polluted with
tar.
Solid The term "biofuels" is also used for
solid fuels that are made from biomass, even though this is less common. == Research into other types ==