Perfume

The word perfume is derived from the Latin perfumare, meaning "to smoke through". Perfumery, as the art of making perfumes, began in Mesopotamia, Egypt, the Indus Valley civilization and possibly Ancient China. It was further refined by the Romans and the Muslims. One of the world's first-recorded chemists is considered to be a woman named Tapputi, a perfume maker mentioned in a cuneiform tablet from the 2nd millennium BC in Mesopotamia. She distilled flowers, oil, and calamus with other aromatics, then filtered and put them back in the still several times. On the Indian subcontinent, perfume and perfumery existed in the Indus civilization (3300 BC – 1300 BC). alembic used to distill perfumes (New York City) In 2003, archaeologists uncovered what are believed to be the world's oldest surviving perfumes in Pyrgos, Cyprus. The perfumes dated back more than 4,000 years. They were discovered in an ancient perfumery, a factory In May 2018, an ancient perfume "Rodo" (Rose) was recreated for the Greek National Archaeological Museum's anniversary show "Countless Aspects of Beauty", allowing visitors to approach antiquity through their olfaction receptors. Romans and Greek extracted perfumes from diverse sources such as flowers, woods, seeds, roots, saps, gums. A temple to Athena in Elis, near Olympia, was said to have saffron blended into its wall plaster, allowing the interior to remain fragrant for 500 years. In the 9th century, the Arab chemist Al-Kindi (Alkindus) wrote the Book of the Chemistry of Perfume and Distillations, which contained more than a hundred recipes for fragrant oils, salves, aromatic waters, and substitutes or imitations of costly drugs. The book also described 107 methods and recipes for perfume-making and perfume-making equipment, such as the alembic (which still bears its Arabic name [from Greek ἄμβιξ, "cup", "beaker"] described by Synesius in the 4th century). The Persian chemist Ibn Sina (also known as Avicenna) introduced the process of extracting oils from flowers by means of distillation, the procedure most commonly used today. He first experimented with the rose. Until his discovery, liquid perfumes consisted of mixtures of oil and crushed herbs or petals, which made a strong blend. Rose water was more delicate and immediately became popular. Both the raw ingredients and the distillation technology significantly influenced Western perfumery and scientific developments, particularly chemistry. There is a controversy on whether perfumery was completely lost in Western Europe after the fall of the Western Roman Empire. That said, the art of perfumery in Western Europe was reinvigorated after the Islamic invasion of Spain and Southern Italy in 711 and 827. The Islamic-controlled cities of Spain (Al-Andalus) became major producers of perfumes that were traded throughout the Old World. Like in the ancient world, Andalusians used fragrance in devotion to God. Perfumes added a layer of cleanliness that was needed for their devotion. Andalusian women were also offered greater freedoms than women in other Muslim controlled regions and were allowed to leave their homes and socialize outside. This freedom allowed courtship to occur outside of the home. As a result, Andalusian women used perfumes for courtship. Recipes of perfumes from the monks of Santa Maria Delle Vigne or Santa Maria Novella of Florence, Italy, were recorded from 1221. In the east, the Hungarians produced around 1370 a perfume made of scented oils blended in an alcohol solution – best known as Hungary Water – at the behest of Queen Elizabeth of Hungary. The art of perfumery prospered in Renaissance Italy, and in the 16th century the personal perfumer to Catherine de' Medici (1519–1589), René the Florentine (Renato il fiorentino), took Italian refinements to France. His laboratory was connected with her apartments by a secret passageway so that no formulae could be stolen en route. Thanks to Rene, France quickly became one of the European centers of perfume and cosmetics manufacture. The cultivation of flowers for their perfume essence, which had begun in the 14th century, grew into a major industry in the south of France. In 1693, Italian barber Giovanni Paolo Feminis created a perfume water called Aqua Admirabilis, today best known as eau de cologne; his nephew Johann Maria Farina (Giovanni Maria Farina) took over the business in 1732. By the 18th century, the Grasse region of France, Sicily, and Calabria (in Italy) were growing aromatic plants to provide the growing perfume industry with raw materials. Even today, Italy and France remain the center of European perfume design and trade. Perfume vase MET 30.8.177 EGDP017567 (cropped).jpg|Ancient Egyptian perfume vase in shape of an amphoriskos; 664–630 BC; glass: ; Metropolitan Museum of Art (New York City) Perfume bottle in shape of an athlete agora museum athens.jpg|Ancient Greek perfume bottle in shape of an athlete binding a victory ribbon around his head; circa 540s BC; Ancient Agora Museum (Athens) Etruscan perfume vase Louvre Br2949.jpg|Etruscan perfume vase, which is inscribed the word "suthina" ("for the tomb"); early 2nd century BC; bronze; height: ; Louvre Glass gold-band mosaic alabastron (perfume bottle) MET DP105812.jpg|Late Hellenistic glass gold-band mosaic alabastron (perfume bottle); 1st century BC; glass and gold leaf; Metropolitan Museum of Art Glass perfume bottle MET DP108896.jpg|Roman perfume bottle; 1st century AD; glass; ; Metropolitan Museum of Art EAM - Perfume amphora.jpg|Partially broken perfume amphora; 2nd century AD; glass; from Ephesus; Ephesus Archaeological Museum (Selçuk, Turkey) Perfume vase MET DP285422.jpg|British Rococo perfume vase; circa 1761; soft-paste porcelain; overall: ; Metropolitan Museum of Art Pair of perfume burners MET DP104612.jpg|British Neoclassical pair of perfume burners; probably circa 1770; derbyshire spar, tortoiseshell, and wood, Carrara marble base, gilded brass mounts, gilded copper liner; ; Metropolitan Museum of Art Louis Comfort Tiffany - Perfume Bottle - 1966.379 - Cleveland Museum of Art.tif|Art Nouveau perfume bottle; circa 1900; glass with gilt metal cover; overall: ; Cleveland Museum of Art (Cleveland, Ohio, USA) ==Dilution classes and terminologies==

flacon 1811, from Johann Maria Farina, Farina gegenüber Perfume types reflect the concentration of aromatic compounds in a solvent, which in fine fragrance is typically ethanol or a mix of water and ethanol. Various sources differ considerably in their definitions of perfume types. The intensity and longevity of a fragrance are based on the concentration, intensity, and longevity of the aromatic compounds, or perfume oils, used. As the percentage of aromatic compounds increases, so does the intensity and longevity of the scent. Specific terms are used to describe a fragrance's approximate concentration by the percent of perfume oil in the volume of the final product. The most widespread terms are: • Parfum or Extrait (P): 15–30% aromatic compounds (IFRA: typically ~20%). In English, parfum is also known as perfume extract, pure perfume, or simply perfume. • Esprit de parfum (ESdP): 15–30% aromatic compounds, a seldom-used strength concentration between EdP and parfum. • Eau de parfum (EdP) or Parfum de toilette (PdT): 15–20% aromatic compounds (typically ~15%). It is sometimes called "eau de perfume" or "millésime." Parfum de toilette is a less common term, most popular in the 1980s, that is generally analogous to eau de parfum. • Eau de toilette (EdT): 5–15% aromatic compounds (typically ~10%). This is the staple for most masculine perfumes. • Eau de cologne (EdC): 2–3% aromatic compounds. This concentration is often simply called cologne. • Eau fraîche: 3% or less aromatic compounds. This general term encompasses products sold as "splashes," "mists," "veils" and other imprecise terms. Such products may be diluted with water rather than oil or alcohol. The wide range in the percentages of aromatic compounds that may be present in each concentration means that the terminology of extrait, EdP, EdT, and EdC is quite imprecise about oil concentration. Although an EdP will often be more concentrated than an EdT and, in turn, an EdC, this is not always the case. Different perfumeries or perfume houses assign different amounts of oils to each of their perfumes. Therefore, although the oil concentration of a perfume in EdP dilution will necessarily be higher than the same perfume in EdT from within a company's same range, the actual amount will vary among companies. An EdT from one house may have a higher concentration of aromatic compounds than an EdP from another. Furthermore, some fragrances with the same product name but having a different concentration may not only differ in their dilutions but actually use different perfume oil mixtures altogether. For instance, in order to make the EdT version of a fragrance brighter and fresher than its EdP, the EdT oil may be "tweaked" to contain slightly more top notes or fewer base notes. Chanel No. 5 is a good example: its parfum, EdP, EdT, and now-discontinued EdC concentrations are different compositions (the parfum dates to 1921, the EdT from the 1950s, and the EdP was not developed until the 1980s). In some cases, words such as extrême, intense, or concentrée that might indicate a higher aromatic concentration are actually completely different fragrances, related only because of a similar perfume accord. An example of this is Chanel's Pour Monsieur and Pour Monsieur concentrée. This complexity adds a layer of nuance to the understanding and appreciation of perfumery, where variations in concentration and formulation can significantly alter the olfactory ("the sense of smell") experience. History of the terms and concentrations The terms "perfume" and "cologne" lead to much confusion in English. "Perfume" is often used as a generic, overarching term referring to fragrances marketed to women, regardless of their exact concentration. The term "cologne" is applied to those sold to men. The actual product worn by a woman may be an eau de parfum rather than an extrait, or by a man, an eau de toilette rather than an eau de cologne. The reasons why the terms "perfume" and "cologne" are often used in a generic sense is related to the modern development of perfumery in Europe since the 18th century. The term "cologne" was first used in Europe in the 18th century to refer to a family of fresh, citrus-based fragrances distilled using extracts from citrus, floral, and woody ingredients. These "classical colognes" were supposedly first developed in Cologne, Germany, hence the name. This type of cologne, which is still in production, describes unisex compositions "which are basically citrus blends and do not have a perfume parent." Examples include Mäurer & Wirtz's 4711 (created in 1799), and Guerlain's Eau de Cologne Impériale (1830). "Toilet water," or eau de toilette, referred to a wide range of scented waters not otherwise known as colognes and were popular throughout the 19th century. The term "perfume" first became known in the late 19th century. The first fragrance labeled a "parfum" extract with a high concentration of aromatic compounds was Guerlain's Jicky in 1889. In the first half of the 20th century, fragrance companies began offering their products in more than one concentration, often pairing an extrait with a lighter eau de toilette suitable for day wear, which made their products available to a wider range of customers. As this process accelerated, perfume houses borrowed the term "cologne" to refer to an even more diluted interpretation of their fragrances than eau de toilette. Guerlain, for example, offered an eau de cologne version of its flagship perfume Shalimar and many of its other fragrances. In contrast to a classical eau de cologne, this type of modern cologne is a lighter, less concentrated interpretation of a more concentrated product, typically a pure parfum, and is usually the lightest concentration from a line of fragrance products. Solvent types Perfume oils are often diluted with a solvent, though this is not always the case, and its necessity is disputed. By far the most common solvent for perfume-oil dilution is alcohol, typically a mixture of ethanol and water or a rectified spirit. Perfume oil can also be diluted by means of neutral-smelling oils such as fractionated coconut oil, or liquid waxes such as jojoba oil and almond oil. Applying fragrances The conventional application of pure perfume (parfum extrait) in Western cultures is behind the ears, at the nape of the neck, under the armpits and at the insides of wrists, elbows and knees so that the pulse point will warm the perfume and release fragrance continuously. According to perfumer Sophia Grojsman behind the knees is the ideal point to apply perfume in order that the scent may rise. The modern perfume industry encourages the practice of layering fragrance so that it is released in different intensities depending upon the time of the day. Lightly scented products such as bath oil, shower gel, and body lotion are recommended for the morning; eau de toilette is suggested for the afternoon; and perfume is applied to the pulse points for evening. Cologne fragrance is released rapidly, lasting around 2 hours. Eau de toilette lasts from 2 to 4 hours, while perfume may last up to six or even eight hours. A variety of factors can influence how fragrance interacts with the wearer's own physiology and affect the perception of the fragrance. Diet is one factor, as eating spicy and fatty foods can increase the intensity of a fragrance. The use of medications can also impact the character of a fragrance. ==Describing a perfume==

. Created by Paul Parquet in 1884, it is one of the most important modern perfumes and inspired the eponymous class of fragrances. The precise formulae of commercial perfumes are kept secret. Even if they were widely published, they would be dominated by such complex ingredients and odorants that they would be of little use in providing a guide to the general consumer in the description of the experience of a scent. Nonetheless, connoisseurs of perfume can become extremely skillful at identifying components and origins of scents in the same manner as wine experts. The most practical way to start describing a perfume is according to the elements of the fragrance notes of the scent or the "family" it belongs to, all of which affect the overall impression of a perfume from first application to the last lingering hint of scent. The trail of scent left behind by a person wearing perfume is called its sillage, after the French word for "wake", as in the trail left by a boat in water. Fragrance notes Perfume is described in a musical metaphor as having three sets of notes, making the harmonious scent accord. The notes are emphasized as it dries down, revealing an immediate impression of the top note leading to the deeper middle notes and the base notes gradually appearing as the final stage. These notes are created carefully with knowledge of the evaporation process of the perfume. • Top notes: Also called the head notes. The scents that are perceived immediately on application of a perfume. Top notes consist of small, light molecules that evaporate quickly. They form a person's initial impression of a perfume and thus are very important in the selling of a perfume. Examples of top notes include mint, lavender and all citrus materials. • Middle notes: Also referred to as heart notes. The scent of a perfume that emerges just before the dissipation of the top note. The middle note compounds form the "heart" or main body of a perfume and act to mask the often unpleasant initial impression of base notes, which become more pleasant with time. Examples of middle notes include "seawater", sandalwood and jasmine. • Base notes: The scent of a perfume that appears close to the departure of the middle notes. The base and middle notes together are the main theme of a perfume. Base notes bring depth and solidity to a perfume. Compounds of this class of scents are typically rich and "deep" and are usually not perceived until 30 minutes after application. Examples of base notes include tobacco, amber and musk. The scents in the top and middle notes are influenced by the base notes; conversely, the scents of the base notes will be altered by the types of fragrance materials used as middle notes. Manufacturers who publish perfume notes typically do so with the fragrance components presented as a fragrance pyramid, using imaginative and abstract terms for the components listed. Olfactive families The grouping of perfumes can never be completely objective or definitive. Many classification systems describe olfactive families by grouping fragrances according to their dominant notes and accords. Since most perfumes combine multiple materials and effects, a single fragrance may be placed in more than one family, or described using hybrid labels (for example, “floral-woody-musk” or “citrus-aromatic”). In contemporary perfumery discourse, families are often discussed at several levels, including broad groupings (such as floral, amber, woody, and fresh), more specific subfamilies (such as chypre or fougère), and descriptive styles that cut across families (such as gourmand or aquatic). The family classification is a starting point to describe a perfume, but insufficient to fully characterize it. Traditional categories The traditional categories which emerged around 1900: • Citrus: The oldest fragrance family that gave birth to lightweight eau de colognes. The development of newer fragrance compounds has allowed for the creation of more tenacious citrus fragrances. Examples: 4711, Guerlain's Eau de Cologne Impériale, Penhaligon's Quercus. • Single Floral: Fragrances dominated by the scent of a particular flower, i.e., rose, carnation, or iris. In French, this type of fragrance is called a soliflore. Example: Serge Lutens Sa Majeste La Rose. • Floral Bouquet: Compound of several flower scents. Examples: Houbigant Quelques Fleurs, Jean Patou Joy. • Amber or "Oriental": Large class featuring sweet, slightly animalic scents of ambergris or labdanum, often combined with vanilla, tonka bean, flowers and woods. Can be enhanced by camphorous oils and incense resins, evoking Victorian era "Oriental" imagery. Traditional examples: Guerlain Shalimar, Yves Saint Laurent Opium, Chanel Coco Mademoiselle. • Woody: Fragrances dominated by woody notes, typically agarwood, sandalwood, cedarwood, and vetiver. Patchouli, with its camphoraceous smell, is commonly found in these perfumes. Traditional examples: Myrurgia Maderas De Oriente, Chanel Bois des Îles. Modern: Balenciaga Rumba. • Leather: A family of fragrances featuring honey, tobacco, wood and wood tars in the middle or base notes and a scent that alludes to leather. Traditional examples: Robert Piguet Bandit, Balmain Jolie Madame. • Chypre (): Meaning Cyprus in French, this category is named after the François Coty's Chypre (1917), which was the first modern fragrance built on an accord of bergamot, oakmoss, and labdanum. Example: Guerlain Mitsouko, Rochas Femme. • '''' (): Meaning fern'' in French, built on a base of lavender, coumarin and oakmoss, with a sharp herbaceous and woody scent. Named for Houbigant's landmark fragrance Fougère Royale, many men's fragrances belong to this family. Modern examples: Fabergé Brut, Guy Laroche Drakkar Noir, Penhaligon's Douro. Modern Since 1945, new categories have emerged to describe modern scents due to great advances in the technology of compound design and synthesis, as well as the natural development of styles and tastes: • Bright Floral: Combining single floral and floral bouquet traditional categories. Example: Estée Lauder Beautiful. • Green: Lighter, more modern interpretation of the Chypre type, with pronounced cut grass, crushed green leaf and cucumber-like scents. Examples: Estée Lauder Aliage, Sisley Eau de Campagne, Calvin Klein Eternity. • Aquatic, Oceanic, Ozonic: The newest category, first appearing in 1988 Davidoff Cool Water (1988), Christian Dior Dune (1991). A clean smell reminiscent of the ocean, leading to many androgynous perfumes. Generally contains calone, a synthetic discovered in 1966, or more recent synthetics such as Floralozone, Helional or even Ambroxan. Also used to accent floral, oriental, and woody fragrances. • Fruity: Featuring fruits other than citrus, such as peach, cassis (blackcurrant), mango, passionfruit, and others. Example: Ginestet Botrytis. • Gourmand (): Scents with "edible" or "dessert-like" qualities, often containing vanilla, tonka bean, and coumarin, as well as synthetic components designed to resemble food flavors. Example: Thierry Mugler's Angel. Fragrance wheel , ver. 1983 This newer classification method is widely used in retail and the fragrance industry, created in 1983 by the perfume consultant Michael Edwards. The new scheme simplifies classification and naming, as well as showing the relationships among the classes. The five main families are Floral, Oriental, Woody, Aromatic Fougère, and Fresh, the first four from the classic terminology and the last from the modern oceanic category. Each of these is divided into subgroups and arranged around a wheel. In this scheme, Chanel No.5, traditionally classified as an aldehydic floral, is placed under the Soft Floral sub-group, while amber scents are within the Oriental group. Chypre perfumes are more ambiguous, having affinities with both the Oriental and Woody families. For instance, Guerlain Mitsouko is under Mossy Woods, but Hermès Rouge, a more floral chypre, is under Floral Oriental. ==Aromatics sources==

Plant sources Plants have long been used in perfumery as a source of essential oils and aroma compounds. These aromatics are usually secondary metabolites produced by plants as protection against herbivores, infections, as well as to attract pollinators. Plants are by far the largest source of fragrant compounds used in perfumery. The sources of these compounds may be derived from various parts of a plant. A plant can offer more than one source of aromatics; for instance, the aerial portions and seeds of coriander have remarkably different odors from each other. Orange leaves, blossoms, and fruit zest are the respective sources of petitgrain, neroli, and orange oils. • Bark: Commonly used barks include cinnamon and cascarilla. The fragrant oil in sassafras root bark is also used either directly or purified for its main constituent, safrole, which is used in the synthesis of other fragrant compounds. • Flowers and blossoms: Undoubtedly the largest and most common source of perfume aromatics. Includes the flowers of several species of rose and jasmine, as well as osmanthus, plumeria, mimosa, tuberose, narcissus, scented geranium, cassie, ambrette as well as the blossoms of citrus and ylang-ylang trees. Although not traditionally thought of as a flower, the unopened flower buds of the clove are also commonly used. Most orchid flowers are not commercially used to produce essential oils or absolutes, except in the case of vanilla, an orchid, which must be pollinated first and made into seed pods before use in perfumery. • Fruits: Fresh fruits such as apples, strawberries, cherries rarely yield the expected odors when extracted; if such fragrance notes are found in a perfume, they are more likely to be of synthetic origin. Notable exceptions include blackcurrant leaf, litsea cubeba, vanilla, and juniper berry. The most commonly used fruits yield their aromatics from the rind; they include citrus such as oranges, lemons, and limes. Although grapefruit rind is still used for aromatics, more and more commercially used grapefruit aromatics are artificially synthesized since the natural aromatic contains sulfur and its degradation product is quite unpleasant in smell. • Leaves and twigs: Commonly used for perfumery are lavender leaf, patchouli, sage, violets, rosemary, and citrus leaves. Sometimes leaves are valued for the "green" smell they bring to perfumes; examples of this include hay and tomato leaf. • Resins: Valued since antiquity, resins have been widely used in incense and perfumery. Highly fragrant and antiseptic resins and resin-containing perfumes have been used by many cultures as medicines for a large variety of ailments. Commonly used resins in perfumery include labdanum, frankincense/olibanum, myrrh, balsam of Peru, benzoin. Pine and fir resins are a particularly valued source of terpenes used in the organic synthesis of many other synthetic or naturally occurring aromatic compounds. Some of what is called amber and copal in perfumery today is the resinous secretion of fossil conifers. • Roots, rhizomes and bulbs: Commonly used terrestrial portions in perfumery include iris rhizomes, vetiver roots, various rhizomes of the ginger family. • Seeds: Commonly used seeds include tonka bean, carrot seed, coriander, caraway, cocoa, nutmeg, mace, cardamom, and anise. • Woods: Highly important in providing the base notes to a perfume, wood oils and distillates are indispensable in perfumery. Commonly used woods include sandalwood, rosewood, agarwood, birch, cedar, juniper, and pine. These are used in the form of macerations or dry-distilled (rectified) forms. • Rom terpenes. Orchid scents Animal sources pod. Extensive hunting of male musk deer for their pods in recent history has resulted in the detriment of the species. • Ambergris: Lumps of oxidized fatty compounds, whose precursors were secreted and expelled by the sperm whale. Ambergris should not be confused with yellow amber, which is used in jewelry nor Ambroxan, as they dont have the same smell. Because the harvesting of ambergris involves no harm to its animal source, it remains one of the few animalic fragrancing agents around which little controversy now exists. • Castoreum: Obtained from the odorous sacs of the North American beaver. • Civet: Also called civet musk, this is obtained from the odorous sacs of the civets, animals in the family Viverridae, related to the mongoose. World Animal Protection investigated African civets caught for this purpose. • Hyraceum: Commonly known as "Africa stone", is the petrified excrement of the rock hyrax. • Honeycomb: From the honeycomb of the honeybee. Both beeswax and honey can be solvent-extracted to produce an absolute. Beeswax is extracted with ethanol, and the ethanol is evaporated to produce beeswax absolute. • Musk: Originally derived from a gland (sac or pod) located between the genitals and the umbilicus of the Himalayan male musk deer Moschus moschiferus, it has now mainly been replaced by the use of synthetic musks sometimes known as "white musk". Other natural sources • Lichens: Commonly used lichens include oakmoss and treemoss thalli. • "Seaweed": Distillates are sometimes used as essential oil in perfumes. An example of a commonly used seaweed is Fucus vesiculosus, which is commonly referred to as bladder wrack. Natural seaweed fragrances are rarely used due to their higher cost and lower potency than synthetics. Synthetic sources Many modern perfumes contain synthesized odorants. For instance, Calone, a compound of synthetic origin, imparts a fresh ozonous metallic marine scent that is widely used in contemporary perfumes. Synthetic aromatics are often used as an alternate source of compounds that are not easily obtained from natural sources. For example, linalool and coumarin are both naturally occurring compounds that can be inexpensively synthesized from terpenes. Orchid scents (typically salicylates) are usually not obtained directly from the plant itself but are instead synthetically created to match the fragrant compounds found in various orchids. One of the most commonly used classes of synthetic aromatics by far are the musks. These materials are found in all forms of commercial perfumes as a neutral background to the middle notes. These musks are often added in large quantities to laundry detergents in order to give washed clothes a lasting "clean" scent. The majority of the world's synthetic aromatics are created by relatively few companies. They include: • Givaudan • International Flavors and Fragrances (IFF) • Firmenich • Robertet • Takasago • Symrise Each of these companies patents several processes for the production of aromatic synthetics annually. Characteristics Natural and synthetics are used for their different odor characteristics in perfumery ==Obtaining natural odorants==

(herbal perfume) vendor on the street of Hyderabad, India, who can compose an original perfume for the customer Before perfumes can be composed, the odorants used in various perfume compositions must first be obtained. Synthetic odorants are produced through organic synthesis and purified. Odorants from natural sources require the use of various methods to extract the aromatics from the raw materials. The results of the extraction are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted product. All these techniques will, to a certain extent, distort the odor of the aromatic compounds obtained from the raw materials. This is due to the use of heat, harsh solvents, or through exposure to oxygen in the extraction process, which will denature the aromatic compounds, which either change their odor character or renders them odorless. • Maceration/Solvent extraction: The most used and economically important technique for extracting aromatics in the modern perfume industry. Raw materials are submerged in a solvent that can dissolve the desired aromatic compounds. Maceration lasts anywhere from hours to months. Fragrant compounds for woody and fibrous plant materials are often obtained in this manner as are all aromatics from animal sources. The technique can also be used to extract odorants that are too volatile for distillation or easily denatured by heat. Commonly used solvents for maceration/solvent extraction include ethane, hexane, and dimethyl ether. The product of this process is called a "concrete." • Supercritical fluid extraction: A relatively new technique for extracting fragrant compounds from a raw material, which often employs Supercritical CO2. Due to the low heat of process and the relatively nonreactive solvent used in the extraction, the fragrant compounds derived often closely resemble the original odor of the raw material. • Ethanol extraction: A type of solvent extraction used to extract fragrant compounds directly from dry raw materials, as well as the impure oily compounds materials resulting from solvent extraction or enfleurage. Ethanol extraction from fresh plant materials contain large quantities of water, which will also be extracted into the ethanol. • Distillation: A common technique for obtaining aromatic compounds from plants, such as orange blossoms and roses. The raw material is heated and the fragrant compounds are re-collected through condensation of the distilled vapor. • Steam distillation: Steam from boiling water is passed through the raw material, which drives out their volatile fragrant compounds. The condensate from distillation are settled in a Florentine flask. This allows for the easy separation of the fragrant oils from the water. The water collected from the condensate, which retains some of the fragrant compounds and oils from the raw material is called hydrosol and sometimes sold. This is most commonly used for fresh plant materials such as flowers, leaves, and stems. • Dry/destructive distillation: The raw materials are directly heated in a still without a carrier solvent such as water. Fragrant compounds that are released from the raw material by the high heat often undergo anhydrous pyrolysis, which results in the formation of different fragrant compounds, and thus different fragrant notes. This method is used to obtain fragrant compounds from fossil amber and fragrant woods where an intentional "burned" or "toasted" odor is desired. • Fractionation: Through the use of a fractionation column, different fractions distilled from a material can be selectively excluded to modify the scent of the final product. Although the product is more expensive, this is sometimes performed to remove unpleasant or undesirable scents of a material and affords the perfumer more control over their composition process. • Expression: Raw material is squeezed or compressed and the essential oils are collected. Of all raw materials, only the fragrant oils from the peels of fruits in the citrus family are extracted in this manner since the oil is present in large enough quantities as to make this extraction method economically feasible. • Enfleurage: Absorption of aroma materials into solid fat or wax and then extraction of odorous oils with ethyl alcohol. Extraction by enfleurage was commonly used when distillation was not possible because some fragrant compounds denature through high heat. This technique is not commonly used in the modern industry due to prohibitive costs and the existence of more efficient and effective extraction methods. ==Fragrant extracts==

Although fragrant extracts are known to the general public as the generic term "essential oils", a more specific language is used in the fragrance industry to describe the source, purity, and technique used to obtain a particular fragrant extract. Of these extracts, only absolutes, essential oils, and tinctures are directly used to formulate perfumes. • Absolute: Fragrant materials that are purified from a pommade or concrete by soaking them in ethanol. By using a slightly hydrophilic compound such as ethanol, most of the fragrant compounds from the waxy source materials can be extracted without dissolving any of the fragrantless waxy molecules. Absolutes are usually found in the form of an oily liquid. • Concrete: Fragrant materials that have been extracted from raw materials through solvent extraction using volatile hydrocarbons. Concretes usually contain a large amount of wax due to the ease in which the solvents dissolve various hydrophobic compounds. As such concretes are usually further purified through distillation or ethanol based solvent extraction. Concretes are typically either waxy or resinous solids or thick oily liquids. • Essential oil: Fragrant materials that have been extracted from a source material directly through distillation or expression and obtained in the form of an oily liquid. Oils extracted through expression are sometimes called expression oils. • Pomade: A fragrant mass of solid fat created from the enfleurage process, in which odorous compounds in raw materials are adsorbed into animal fats. Pommades are found in the form of an oily and sticky solid. • Tincture: Fragrant materials produced by directly soaking and infusing raw materials in ethanol. Tinctures are typically thin liquids. Products from different extraction methods are known under different names, even though their starting materials are the same. For instance, orange blossoms from Citrus aurantium that have undergone solvent extraction produces "orange blossom absolute" but that which have been steam distilled is known as "neroli oil". ==Composing perfumes==

Perfume compositions are an important part of many industries ranging from the luxury goods sectors, food services industries to manufacturers of various household chemicals. The purpose of using perfume or fragrance compositions in these industries is to affect customers through their sense of smell and entice them into purchasing the perfume or perfumed product. As such, there is significant interest in producing a perfume formulation that people will find aesthetically pleasing. The perfumer The job of composing perfumes that will be sold is left up to an expert on perfume composition or known in the fragrance industry as the perfumer. They are also sometimes referred to affectionately as a "Nez" (French for nose) due to their fine sense of smell and skill in smell composition. The composition of a perfume typically begins with a brief by the perfumer's employer or an outside customer. The customers to the perfumer or their employers, are typically fashion houses or large corporations of various industries. The perfumer will then go through the process of blending multiple perfume mixtures and sell the formulation to the customer, often with modifications of the composition of the perfume. The perfume composition will then be either used to enhance another product as a functional fragrance (shampoos, make-up, detergents, car interiors, etc.), or marketed and sold directly to the public as a fine fragrance. Fragrance bases , France Instead of building a perfume from "ground up", many modern perfumes and colognes are made using fragrance bases or simply bases. Each base is essentially a skeleton formula that is blended from essential oils and or aromatic chemicals, and formulated with a simple concept such as "fresh cut grass" or "juicy sour apple". Many of Guerlain's Aqua Allegoria line, with their simple fragrance concepts, are good examples of what perfume fragrance bases are like. The effort used in developing bases by fragrance companies or individual perfumers may equal that of a marketed perfume, since they are useful in that they are reusable. On top of its reusability, the benefit in using bases for construction are quite numerous: • Ingredients with "difficult" or "overpowering" scents that are tailored into a blended base may be more easily incorporated into a work of perfume • A base may be better scent approximations of a certain thing than the extract of the thing itself. For example, a base made to embody the scent for "fresh dewy rose" might be a better approximation for the scent concept of a rose after rain than plain rose oil. Flowers whose scents cannot be extracted, such as gardenia or hyacinth, are composed as bases from data derived from headspace technology. • A perfumer can quickly rough out a concept from a brief by combining multiple bases, then present it for feedback. Smoothing out the "edges" of the perfume can be done after a positive response. Reverse engineering Creating perfumes through reverse engineering with analytical techniques such as Gas chromatography–mass spectrometry (GC/MS) can reveal the "general" formula for any particular perfume. The difficulty of GC/MS analysis arises due to the complexity of a perfume's ingredients. This is particularly due to the presence of natural essential oils and other ingredients consisting of complex chemical mixtures. However, "anyone armed with good GC/MS equipment and experienced in using this equipment can today, within days, find out a great deal about the formulation of any perfume... customers and competitors can analyze most perfumes more or less precisely." Antique or badly preserved perfumes undergoing this analysis can also be difficult due to the numerous degradation by-products and impurities that may have resulted from breakdown of the odorous compounds. Ingredients and compounds can usually be ruled out or identified using gas chromatograph (GC) smellers, which allow individual chemical components to be identified both through their physical properties and their scent. Reverse engineering of best-selling perfumes in the market is a very common practice in the fragrance industry due to the relative simplicity of operating GC equipment, the pressure to produce marketable fragrances, and the highly lucrative nature of the perfume market. In 2006 the Dutch Supreme Court granted copyright protection to Lancôme's perfume Tresor (Lancôme v. Kecofa). The French Supreme Court has twice taken the position that perfumes lack the creativity to constitute copyrightable expressions (Bsiri-Barbir v. Haarman & Reimer, 2006; Beaute Prestige International v. Senteur Mazal, 2008). • Resellers in offline stores (in malls, airport shops) can offer "fillable" perfumery, sometimes using weasel wording to justify the price. • Such perfumes usually get three-digit numbers as an officially registered name, which is stickered to the bottles. • When it comes to propellant, a "number" usually has an alcohol base [almost] without stabilization (which may give strong "alcohol base stench", altering perfume's scent into the "smell of cheapness" phenomenon). • To avoid this, many "numbers" can be made with (di)propylenglicol base and come as "perfume oil(s)". PG or DPG based numbered perfumery comes in 50ml plastic bottles and is purposed for tiny rollers; (D)PG is not usable in spray bottles (while not affected by the "smell of cheapness" issue nonetheless). Some companies offer all of their own "numbers" in both alcohol based and (D)PG based variants. In small online "bulk", however (in purchases over 5000RUB), a whole 100ml bottle of such perfume (or 50ml bottle of "scent oil" of same "direction") costs only around 6 EUR. ==Health and environmental issues==

Perfume ingredients, regardless of natural or synthetic origins, may all cause health or environmental problems when used. Although the areas are under active research, much remains to be learned about the effects of fragrance on human health and the environment. Immunological; asthma and allergy Evidence in peer-reviewed journals shows that some fragrances can cause asthmatic reactions in some individuals, especially those with severe or atopic asthma. Many fragrance ingredients can also cause headaches, allergic skin reactions or nausea. In some cases, an excessive use of perfumes may cause allergic reactions of the skin. For instance, acetophenone, ethyl acetate and acetone Some research on natural aromatics have shown that many contain compounds that cause skin irritation. However some studies, such as IFRA's research claim that opoponax is too dangerous to be used in perfumery, still lack scientific consensus. It is also true that sometimes inhalation alone can cause skin irritation. A number of national and international surveys have identified balsam of Peru, often used in perfumes, as being in the "top five" allergens most commonly causing patch test reactions in people referred to dermatology clinics. A study in 2001 found that 3.8% of the general population patch tested was allergic to it. Many perfumes contain components identical to balsam of Peru. Balsam of Peru is used as a marker for perfume allergy. Its presence in a cosmetic is denoted by the INCI term Myroxylon pereirae. Balsam of Peru has been banned by the International Fragrance Association since 1982 from use as a fragrance compound, but may be present as an extract or distillate in other products, where mandatory labelling is not required for usage of 0.4% or less.) and musk xylene was found to be safe for continued use in cosmetic products. It is in fact part of the procedures of the Cosmetic Regulation in Europe that materials classified as carcinogens require such a safety evaluation by the authorities to be allowed in cosmetic consumer products. Perfumes contain compounds like parabens, phthalates, and nitro musks that can disrupt the body’s endocrine system by being absorbed through the skin, and have been linked to a myriad of serious health concerns including breast cancer, dermatitis, and even neurological disorders in fetuses. Some studies suggest a potential connection between chemical exposure during pregnancy and autism, as perfumes release over 100 volatile organic compounds. Although other ingredients such as polycyclic synthetic musks, have been reported to be positive in some in-vitro hormone assays, these reports have been reviewed by various authorities. For example, for one of the main polycyclic musks Galaxolide (HHCB) these reviews include those of the EU Scientific Committee on Consumer Safety, the EU's Priority Substances Review, the EU Scientific Committee on Health and Environmental Risk, and more recently also the US EPA. The outcome of all of these reviews over the past decade or so is that there are no safety concerns for human health. Reviews with similar positive outcomes also exist for another main polycyclic musk (AHTN)—for instance, on its safe use in cosmetics by the EU. Many natural aromatics, such as oakmoss absolutes, basil oil, rose oil and many others contain allergens or carcinogenic compounds, the safety of which is either governed by regulations (e.g. allowed methyl eugenol levels in the EU Cosmetics Regulation (Entry102, AnnexIII of the EU Cosmetics Regulation.) or through various limitations set by the International Fragrance Association. Environmental Pollution Synthetic musks are pleasant in smell and relatively inexpensive, as such they are often employed in large quantities to cover the unpleasant scent of laundry detergents and many personal cleaning products. Due to their large-scale use, several types of synthetic musks have been found in human fat and milk, as well as in the sediments and waters of the Great Lakes. These pollutants may pose additional health and environmental problems when they enter human and animal diets. Species endangerment The demands for aromatic materials such as sandalwood, agarwood, and musk have led to the endangerment of these species, as well as illegal trafficking and harvesting. Safety regulations The US FDA controls the safety of perfumes through their ingredients and requires that they be tested to the extent that they are Generally recognized as safe (GRAS). Due to the need for protection of trade secrets, companies rarely give the full listing of ingredients regardless of their effects on health. In the EU, as from 11 March 2005, the mandatory listing of a set of 26 recognized fragrance allergens was enforced. The requirement to list these materials is dependent on the intended use of the final product. The limits above which the allergens are required to be declared are 0.001% for products intended to remain on the skin, and 0.01% for those intended to be rinsed off. This has resulted in many old perfumes like chypres and fougère classes, which traditionally make use of oakmoss extract, being reformulated. ==Preserving perfume==

'', by Edwin Austin Abbey, 1899 Fragrance compounds in perfumes will degrade or break down if improperly stored in the presence of heat, light, oxygen, and extraneous organic materials. Proper preservation of perfumes involves keeping them away from sources of heat and storing them where they will not be exposed to light. An opened bottle will keep its aroma intact for several years, as long as it is well stored. ==Lists of perfumes==