•
EN 1: Flued oil stoves with vaporizing burners •
EN 2: Classification of fires •
EN 3: Portable fire extinguishers •
EN 14: Dimensions of bed blankets •
EN 19: Industrial valves – Marking of metallic valves •
EN 20: Wood preservatives. •
EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water •
EN 40: Lighting columns •
EN 40-1: Part 1: Definitions and terms •
EN 40-2: Part 2: General requirements and dimensions •
EN 40-3-1: Part 3-1: Design and verification - Specification for characteristic loads •
EN 40-3-2: Part 3-2: Design and verification - Verification by testing •
EN 40-3-3: Part 3-3: Design and verification - Verification by calculation •
EN 40-4: Part 4: Requirements for reinforced and prestressed concrete lighting columns •
EN 40-5: Part 5: Requirements for steel lighting columns •
EN 40-6: Part 6: Requirements for aluminium lighting columns •
EN 40-7: Part 7: Requirements for fibre reinforced polymer composite lighting columns •
EN 54: Fire detection and fire alarm systems •
EN 71: Safety of toys •
EN 81: Safety of lifts and escalators •
EN 115: Safety of escalators & Moving walks •
EN 131: Ladders •
EN 136: Respiratory protective devices – Full-face masks – Requirements, testing and marking •
EN 137: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking •
EN 140: Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking •
EN 142: Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking •
EN 143: Respiratory protective devices – Particle filters – Requirements, testing, marking •
EN 144: Respiratory protective devices – Gas cylinder valves •
EN 144-1: Part 1: Thread connections for insert connector •
EN 144-2: Part 2: Outlet connections •
EN 144-3: Part 3: Outlet connections for diving gases Nitrox and oxygen •
EN 145 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking •
EN 148 Respiratory protective devices – Threads for facepieces •
EN 148-1: Part 1: Standard thread connection •
EN 148-2: Part 2: Centre thread connection •
EN 148-3: Part 3: Tread connection M 45 x 3 •
EN 149: Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking •
EN 166: Personal eye-protection – Specifications •
EN 169: Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use •
EN 170: Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use •
EN 172: Personal eye protection – Sunglare filters for industrial use •
EN 174: Personal eye-protection – Ski goggles for downhill skiing •
EN 175: Personal protection – Equipment for eye and face protection during welding and allied processes •
EN 196: Methods for testing cement (10 parts) •
EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements •
EN 197-2: Cement – Part 2 : Conformity evaluation •
EN 206-1: Concrete – Part 1: Specification, performance, production and conformity •
EN 207: Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors) •
EN 208: Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) •
EN 228: Specifications for automotive petrol •
EN 250: Respiratory equipment – Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking •
EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests • EN 286: Simple unfired pressure vessels designed to contain air or nitrogen • Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock • Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock •
EN 287: Qualification test of welders — Fusion welding • Part 1: Steels •
EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs •
EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans •
EN 301 549: European standard for
digital accessibility •
EN 336: Structural timber — Sizes, permitted deviations •
EN 338: Structural timber — Strength classes •
EN 341: Personal protective equipment against falls from a height. Descender devices •
EN 342: Protective clothing – Ensembles and garments for protection against cold •
EN 343: Protective clothing – Protection against rain •
EN 352: Hearing protectors – General requirements •
EN 352-1: Part 1: Earmuffs •
EN 352-2: Part 2:
Earplugs •
EN 352-3: Part 3: Earmuffs attached to head protection and/or face protection devices •
EN 352: Hearing protectors – Safety requirements •
EN 352-4: Part 4: Level-dependent earmuffs •
EN 352-5: Part 5: Active noise reduction earmuffs •
EN 352-6: Part 6: Earmuffs with safety-related audio input •
EN 352-7: Part 7: Level-dependent earplugs •
EN 352-8: Part 8: Entertainment audio earmuffs •
EN 352-9: Part 9: Earplugs with safety-related audio input •
EN 352-10: Part 10: Entertainment audio earplugs •
EN 353-1: Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line •
EN 353-2: Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line •
EN 354: Personal fall protection equipment – Lanyards •
EN 355: Personal protective equipment against falls from a height – Energy absorbers •
EN 358: Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint •
EN 360: Personal fall protection equipment – Retractable type fall arresters •
EN 361: Personal protective equipment against falls from a height – Full body harnesses •
EN 362: Personal protective equipment against falls from a height – Connectors •
EN 363: Personal protective equipment against falls from a height – Fall arrest systems •
EN 365: Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging •
EN ISO 374: Protective gloves against dangerous chemicals and micro-organisms •
EN ISO 374-1: Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) •
EN ISO 374-5: Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) •
EN 379: Personal eye-protection – Automatic welding filters •
EN 381: Protective clothing for users of hand-held chain saws •
EN 381-5: Part 5: Requirements for leg protectors •
EN 381-7: Part 7: Requirements for chainsaw protective gloves •
EN 381-9: Part 9: Requirements for chain saw protective gaiters •
EN 381-11: Part 11: Requirements for upper body protectors •
EN 386: Glued laminated timber - Performance requirements and minimum production requirements •
EN 388: Protective gloves against mechanical risks •
EN 390: Glued laminated timber. Sizes. Permissible deviations •
EN 391: Glued laminated timber - Delamination tests of glue lines •
EN 392: Glued laminated timber - Shear test of glue lines •
EN 397: Industrial safety helmets •
EN 402: Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking •
EN 403: Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking •
EN 404: Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly •
EN 405: Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking •
EN 407: Protective gloves against thermal risks (heat and/or fire) •
EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties •
EN 417: Non-refillable metallic cartridges for
liquefied petroleum gases •
EN 420: Protective gloves – General requirements and test methods •
EN 421: Protective gloves against ionizing radiation and radioactive contamination •
EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. •
EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994) •
EN 443: Helmets for fire fighting in buildings and other structures •
EN 450: Fly ash for concrete - Definitions, requirements and quality control •
EN 469: Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities •
EN 474: Earth-moving Machinery. Safety. General Requirements •
EN 510: Specification for protective clothing for use where there is a risk of entanglement with moving parts •
EN 511: Protective gloves against cold •
EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1) •
EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1) •
EN 564: Mountaineering equipment – Accessory cords – Safety requirements and test methods •
EN 565: Mountaineering equipment – Tape – Safety requirements and test methods •
EN 566: Mountaineering equipment – Slings – Safety requirements and test methods •
EN 567: Mountaineering equipment – Rope clamps – Safety requirements and test methods •
EN 568: Mountaineering equipment – Ice anchors – Safety requirements and test methods •
EN 569: Mountaineering equipment – Pitons – Safety requirements and test methods •
EN 590: Specification for automotive diesel •
EN 631: Containers for foodstuffs •
EN 659: Protective gloves for firefighters •
EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems •
EN 716: Children's cots and folding cots for domestic use •
EN 795: Personal fall protection equipment – Anchor devices •
EN 805: Water supply. Requirements for systems and components outside buildings •
EN 812: Industrial bump caps •
EN 813: Personal fall protection equipment – Sit harnesses •
EN 837: Pressure connections •
EN 840: Mobile waste containers. •
EN 877: Cast iron pipes and
fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance •
EN 892: Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods •
EN 893: Mountaineering equipment – Crampons – Safety requirements and test methods •
EN 926: Paragliding equipment - Paragliders •
EN 926-1: Part 1: Requirements and test methods for structural strength •
EN 926-2: Part 2: Requirements and test methods for classifying flight safety characteristics •
EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method •
EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements •
EN 943: Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols •
EN 943-1: Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits •
EN 943-2: Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) •
EN 958: Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods •
EN 966: Helmets for airborne sports •
EN 980: Symbols for use in the labeling of medical devices == EN 1000–1989 ==