; Fuel handling :
Radioactive waste system :
Refueling floor :
Spent fuel pool :
Online refueling machine(s) in some designs such as
RBMK and
CANDU ; Power generation :
Condenser :
Cooling tower :
Electrical generator :
Steam turbine ; Reactor assembly : Control rod drives : Instrumentation such as
ion chambers :
Control rods :
Coolant :
Neutron howitzer :
Neutron moderator :
Neutron poison :
Nuclear fuel :
Nuclear reactor core :
Reactor pressure vessel (In most reactors) :
Startup neutron source ;
Safety systems :
Containment building :
Emergency core cooling system :
Emergency power system :
Essential service water system :
Reactor protection system :
Standby liquid control system ; Steam generation :
Boiler feedwater pump :
Steam generators (in PWR reactors, which also have pressurizers)
Systems (BWR) The conversion to electrical energy takes place indirectly, as in conventional thermal power stations. The fission in a nuclear reactor heats the reactor coolant. The coolant may be water or gas, or even liquid metal, depending on the type of reactor. The reactor coolant then goes to a
steam generator and heats water to produce steam (in the case of pressurized water reactors, PWRs), or may be converted to steam directly in the reactor (in the case of boiling water reactors, BWRs). The pressurized steam is then usually fed to a multi-stage
steam turbine. After the steam turbine has expanded and partially condensed the steam, the remaining vapor is condensed in a condenser. The condenser is a heat exchanger which is connected to a secondary side such as a river or a
cooling tower. The water is then pumped back into the steam generator and the cycle begins again. The water-steam cycle corresponds to the
Rankine cycle. The
nuclear reactor is the heart of the station. In its central part, the reactor's core produces heat due to nuclear fission. With this heat, a coolant is heated as it is pumped through the reactor and thereby removes the energy from the reactor. The heat from nuclear fission is used to raise steam, which runs through
turbines, which in turn power the electrical generators. Different isotopes have different behaviors. For instance, U-235 is fissile which means that it is easily split and gives off a lot of energy making it ideal for nuclear energy. On the other hand, U-238 does not have that property despite it being the same element. Different isotopes also have different
half-lives. U-238 has a longer half-life than U-235, so it takes longer to decay over time. This also means that U-238 is less radioactive than U-235. Since nuclear fission creates radioactivity, the reactor core is surrounded by a protective shield. This containment absorbs radiation and prevents
radioactive material from being released into the environment. In addition, many reactors are equipped with a dome of concrete to protect the reactor against both internal casualties and external impacts. (PWR) The purpose of the
steam turbine is to convert the heat contained in steam into mechanical energy. The engine house with the steam turbine is usually structurally separated from the main reactor building. It is aligned so as to prevent debris from the destruction of a turbine in operation from flying towards the reactor and important safety systems. In the case of a pressurized water reactor, the steam turbine is separated from the nuclear system. To detect a leak in the steam generator and thus the passage of radioactive water at an early stage, an activity meter is mounted to track the outlet steam of the steam generator. In contrast, boiling water reactors pass radioactive water through the steam turbine, so the turbine is kept as part of the radiologically controlled area of the nuclear power station. The
electric generator converts mechanical power supplied by the turbine into electrical power. Low-pole AC synchronous generators of high rated power are used. A cooling system removes heat from the reactor core and transports it to another area of the station, where the thermal energy can be harnessed to produce electricity or to do other useful work. Typically the hot coolant is used as a heat source for a boiler, and the pressurized steam from that drives one or more
steam turbine driven
electrical generators. In the event of an emergency, safety valves can be used to prevent pipes from bursting or the reactor from exploding. The valves are designed so that they will open automatically and maintain pressure under the reactor's safety limits. In the case of the
BWR, the steam is directed into the suppression chamber and condenses there. The chambers on a
heat exchanger are connected to the intermediate cooling circuit. The main condenser is a large cross-flow
shell and tube heat exchanger that takes wet vapor, a mixture of liquid water and steam at saturation conditions, from the turbine-generator exhaust and condenses it back into sub-cooled liquid water so it can be pumped back to the reactor by the condensate and feedwater pumps. In the main condenser, the wet vapor turbine exhaust come into contact with thousands of tubes that have much colder water flowing through them on the other side. The cooling water typically come from a natural body of water such as a river or lake.
Palo Verde Nuclear Generating Station, located in the desert about west of Phoenix, Arizona, is the only nuclear facility that does not use a natural body of water for cooling, instead using treated sewage from the greater Phoenix metropolitan area. The water coming from the cooling body of water is either pumped back to the water source at a warmer temperature or returns to a cooling tower where it either cools for more uses or evaporates into water vapor that rises out the top of the tower. The water level in the steam generator and the nuclear reactor is controlled using the feedwater system. The feedwater pump has the task of taking the water from the condensate system, increasing the pressure and forcing it into either the steam generators—in the case of a
pressurized water reactor — or directly into the reactor, for
boiling water reactors. Continuous power supply to the plant is critical to ensure safe operation. Most nuclear stations require at least two distinct sources of offsite power for redundancy. These are usually provided by multiple transformers that are sufficiently separated and can receive power from multiple transmission lines. In addition, in some nuclear stations, the turbine generator can power the station's loads while the station is online, without requiring external power. This is achieved via station service transformers which tap power from the generator output before they reach the step-up transformer. == World operating status ==