Rammed earth

Making rammed earth involves compacting a damp mixture of subsoil that has suitable proportions of sand, gravel, clay, silt, and stabilizer if any, into a formwork (an externally supported frame or mold). Historically, additives such as lime or animal blood were used to stabilize it. Soil mix is poured into the formwork to a depth of and then compacted to approximately 50% of its original volume. The soil is compacted iteratively in batches or courses so as to gradually erect the wall up to the top of the formwork. Tamping was historically manual with a long ramming pole by hand, but modern construction systems can employ pneumatically-powered tampers. housebuilding technique in the subtropical climate of Vietnam After a wall is complete, it is sufficiently strong to immediately remove the formwork. This is necessary if a surface texture is to be applied, e.g., by wire brushing, carving, or mold impression because the walls become too hard to work after approximately one hour. The compressive strength of rammed earth increases as it cures. Cement-stabilized rammed earth is cured for a minimum period of 28 days. In modern rammed-earth buildings, the walls are constructed on top of conventional footings or a reinforced-concrete slab base. The construction of an entire wall begins with a temporary frame, the "formwork", which is usually made of wood or plywood, as a mold for each wall section's desired shape and dimensions. The form must be durable and well-braced, and the two opposing faces must be clamped together to prevent bulging or deformation caused by the large compressing forces. Formwork plays an important role in building rammed-earth walls. Historically, wooden planks tied using rope were used to build walls. Modern builders use plywood or steel (or both) to build formwork. ==Characteristics==

and subtler horizontal strata from successive courses. The compressive strength of rammed earth is dictated by factors such as soil type, particle size distribution, amount of compaction, moisture content of the mix and type/amount of stabiliser used. Well-produced cement-stabilised rammed-earth walls can be anywhere between . Higher compressive strength might require more cement. But addition of more cement can affect the permeability of the walls. Indeed, properly constructed rammed earth endures for thousands of years, as many ancient structures that are still standing around the world demonstrate. In areas of high seismic activity, rammed-earth walls are reinforced with rebars. Adding cement to soil mixtures low in clay can also increase the load-bearing capacity of rammed-earth edifices. The United States Department of Agriculture observed in 1925 that rammed-earth structures endure indefinitely and can be constructed for less than two-thirds of the cost of standard frame houses. One significant benefit of rammed earth is its high thermal mass: like brick or concrete, it absorbs heat during the day and releases heat at night. This action moderates daily temperature variations and reduces the need for air conditioning and heating. In colder climates, rammed-earth walls can be insulated by inserting insulation such as styrofoam or rigid fibreglass panels within internal and external layers of rammed earth. Depending on the type and content of binder, it must also be protected from heavy rain and insulated with vapour barriers. Rammed earth can effectively regulate humidity if unclad walls containing clay are exposed to an internal space. Humidity is regulated between 40% and 60%. The material mass and clay content of rammed earth allows an edifice to breathe more than concrete edifices. This avoids problems of condensation and prevents significant loss of heat. Rammed-earth walls have the colour and texture of natural earth. Moisture-impermeable finishes, such as cement render, are not used by some people because they impair the ability of a wall to desorb moisture, which quality is necessary to preserve its strength. Blemishes can be repaired using the soil mixture as a plaster and sanded smooth. The thickness varies widely based on region and code. It can be as little as for non load-bearing walls and up to for load-bearing walls. The thickness and density of rammed-earth walls make them suitable for soundproofing. They are also inherently fireproof, resistant to termite damage, and non-toxic. ==Environmental effects and sustainability==

constructed by Design Build Bluff Edifices of rammed earth are potentially more sustainable and environmentally friendly than other building techniques, depending on multiple factors and level of local material sourcing. Rammed-earth edifices that use locally available materials have low embodied energy and generate very little waste. The soils used are typically subsoil which conserve the topsoil for agriculture. When the soil excavated in preparation for a foundation can be used, the cost and energy consumption of transportation are minimal, but this requires testing of materials for suitability. Rammed earth has potentially low manufacturing footprint, contingent on the amount of cement and the amount that is locally sourced; it is often quarried aggregates rather than "earth". Rammed earth can contribute to the overall energy efficiency of edifices: the density, thickness, and thermal conductivity of rammed earth render it an especially suitable material for passive solar heating. Warmth requires almost 12 hours to be conducted through a wall thick. Although it has low greenhouse gas emissions in theory, transportation and the production of cement can add significantly to the overall emissions of modern rammed-earth construction. For example, a 300 mm rammed-earth wall with 5% cement content produces slightly more emissions than a 100mm concrete wall. ==History==

Evidence of ancient use of rammed earth has been found in Neolithic archaeological sites such as those of the Fertile Crescent, dating to the 9th–7th millennium BC, and of the Yangshao and Longshan cultures in China, dating to 5000 BCE. By 2000 BCE, rammed-earth architectural techniques (夯土 Hāng tǔ) were commonly used for walls and foundations in China. United States and Canada In the 1800s, rammed earth was popularized in the United States by the book Rural Economy by S. W. Johnson. The technique was used to construct the Borough House Plantation and the Church of the Holy Cross in Stateburg, South Carolina, both being National Historic Landmarks. An outstanding example of a rammed-earth edifice in Canada is St. Thomas Anglican Church in Shanty Bay, Ontario, erected between 1838 and 1841. , Stateburg, South Carolina, erected in the 1820s. in Stateburg, South Carolina, erected between 1850 and 1852 From the 1920s through the 1940s rammed-earth construction in the US was studied. South Dakota State College extensively researched and constructed almost one hundred weathering walls of rammed earth. For over 30 years the college investigated the use of paints and plasters in relation to colloids in soil. In 1943, Clemson Agricultural College of South Carolina published the results of their research of rammed earth in a pamphlet titled "Rammed Earth Building Construction". In 1936, on a homestead near Gardendale, Alabama, the United States Department of Agriculture constructed experimental rammed-earth edifices with architect Thomas Hibben. The houses were inexpensively constructed and were sold to the public along with sufficient land for gardens and small plots for livestock. The project successfully provided homes to low-income families. Interest in rammed earth declined after World War II when the cost of modern construction materials decreased. Rammed earth is considered substandard, and is opposed by many contractors, engineers, and tradesmen. Australia Australia has developed a significant contemporary technical culture of rammed-earth construction, particularly in Western Australia. The history of rammed earth in Australia dates back to early colonial times, with each state and territory using rammed earth in some capacity, though it was most prominent in New South Wales, where the architectural legacy of the MacKnight family had a lasting influence in the Riverina region. Contemporary Australian rammed-earth construction first developed in the 1970s in Western Australia, where numerous examples of residential, educational, commercial, and community buildings have been constructed over the last 40 years. The rammed-earth construction method is well established in Western Australia and is an economical option in that state. Despite growing interest, one obstacle to wider adoption of rammed earth in Australia is the lack of a national building code specifically for rammed-earth buildings, which discourages many engineers and architects from using it. The "Daqing Spirit" represented deep personal commitment in pursuing national goals, self-sufficient and frugal living, and urban-rural integrated land use. Daqing's urban-rural landscape was said to embody the ideal communist society described by Karl Marx because it eliminated (1) the gap between town and country, (2) the gap between workers and peasants, and (3) the gap between manual and mental labor. This policy came to be expressed through the slogan, "First build the factory and afterward housing." Africa Earth structures have been an important autochthonous building technology across the continent for millennia, but no building codes existed to encourage its use in the post-industrial era. In the late 1970s, British architect Julian Keable was asked for his opinion on building without cement for the new Tanzanian capital Dodoma. He referred back to Clough Williams-Ellis' seminal work and discarded all but the pisé, generally called rammed earth. This led to pilot projects in Tanzania, Sierra Leone, Ghana, Kenya, Uganda and Malawi through the late 1970s until the early 1990s. Towards the end of that time he became the project manager of the Overseas Development Agency's project to codify rammed-earth techniques in an African context, which became Rammed Earth Structures: A Code of Practice. The code of practice became a national standard in Zimbabwe, then a Southern African Development Community Standard, and finally Keable's book was adopted as an African Regional Standard. Europe In Europe, especially in France, Britain and Germany, traditional rammed earth is experiencing a resurgence in contemporary architecture. Several modern buildings have been constructed using traditional rammed-earth techniques, including notable examples such as a three-storey home built in Austria in 2008. Historically, rammed earth (known as "pisé de terre" in French) was a common building technique in parts of Europe, particularly in rural areas where access to other building materials was limited. Many historical rammed-earth structures still remain throughout Europe, particularly in France, Spain, and Germany, demonstrating the durability of the technique when properly maintained. The modern European revival of rammed earth is closely tied to the growth of sustainable architecture movements and interest in traditional building techniques. Contemporary European rammed-earth buildings are often designed as showcase projects that demonstrate the aesthetic and environmental qualities of the material, though they remain relatively rare compared to conventional construction methods. ==See also==

• Rammed earth wall construction at Central Arizona College • Why Build Rammed Earth Homes?