Jewelry at the
Egyptian Museum in
Cairo,
Egypt in 2016 Pure (24k) gold is often
alloyed with other metals for use in jewelry, altering its hardness and ductility, melting point, color and other properties. Alloys with lower
karat rating, typically 22k, 18k, 14k or 10k, contain higher percentages of copper, silver, or other base metals in the alloy. Nickel is toxic, and its release from nickel white gold is controlled by legislation in Europe. High-karat white gold alloys are more resistant to corrosion than are either pure silver or
sterling silver, though not as corrosion-proof as
platinum jewelry. The Japanese craft of
Mokume-gane exploits the color contrasts between laminated colored gold alloys to produce decorative wood-grain effects. Gold
solder is used for joining the components of gold jewelry by high-temperature hard soldering or
brazing. If the work is to be of
hallmarking quality, the gold solder alloy must match the fineness of the work, and alloy formulas are manufactured to color-match yellow and white gold. Gold solder is usually made in at least three melting-point ranges referred to as Easy, Medium and Hard. By using the hard, high-melting point solder first, followed by solders with progressively lower melting points, goldsmiths can assemble complex items with several separate soldered joints. Gold can also be made into
thread and used in
embroidery.
Electronics Only 10% of the world consumption of new gold produced goes to industry, Though gold is attacked by free chlorine, its good conductivity and general resistance to oxidation and corrosion in other environments (including resistance to non-chlorinated acids) has led to its widespread industrial use in the electronic era as a thin-layer coating on
electrical connectors, thereby ensuring good connection. For example, gold is used in the connectors of the more expensive electronics cables, such as audio, video and
USB cables. The benefit of using gold over other connector metals such as
tin in these applications has been debated; gold connectors are often criticized by audio-visual experts as unnecessary for most consumers and seen as simply a marketing ploy. However, the use of gold in other applications in electronic sliding contacts in highly humid or corrosive atmospheres, and in use for contacts with a very high failure cost (certain
computers, communications equipment,
spacecraft,
jet aircraft engines) remains very common. Besides sliding electrical contacts, gold is also used in
electrical contacts because of its resistance to
corrosion,
electrical conductivity,
ductility and lack of
toxicity. Switch contacts are generally subjected to more intense corrosion stress than are sliding contacts. Fine gold wires are used to connect
semiconductor devices to their packages through a process known as
wire bonding. The concentration of free electrons in gold metal is 5.91×1022 cm−3. Gold is highly
conductive to electricity and has been used for
electrical wiring in some high-energy applications (only silver and copper are more conductive per volume, but gold is the only of these three with zero corrosion). For example, gold electrical wires were used during some of the
Manhattan Project's atomic experiments, but large high-current silver wires were used in the
calutron isotope separator magnets in the project. It is estimated that 16% of the world's presently-accounted-for gold and 22% of the world's silver is contained in electronic technology in Japan.
Medicine There are only two gold compounds currently employed as pharmaceuticals in modern medicine (
sodium aurothiomalate and
auranofin), used in the treatment of arthritis and other similar conditions in the US due to their
anti-inflammatory properties. These drugs have been explored as a means to help to reduce the pain and swelling of
rheumatoid arthritis, and also (historically) against
tuberculosis and some parasites. Historically, metallic and gold compounds have long been used for medicinal purposes. Gold, usually as the metal, is perhaps the most anciently administered medicine (apparently by shamanic practitioners) In medieval times, gold was often seen as beneficial for the health, in the belief that something so rare and beautiful could not be anything but healthy. In the 19th century gold had a reputation as an
anxiolytic, a therapy for nervous disorders.
Depression,
epilepsy,
migraine, and glandular problems such as
amenorrhea and
impotence were treated, and most notably
alcoholism (Keeley, 1897). The apparent paradox of the actual toxicology of the substance suggests the possibility of serious gaps in the understanding of the action of gold in physiology. Only salts and radioisotopes of gold are of pharmacological value, since elemental (metallic) gold is inert to all chemicals it encounters inside the body (e.g., ingested gold cannot be attacked by stomach acid). Gold alloys are used in
restorative dentistry, especially in tooth restorations, such as
crowns and permanent
bridges. The gold alloys' slight malleability facilitates the creation of a superior molar mating surface with other teeth and produces results that are generally more satisfactory than those produced by the creation of porcelain crowns. The use of gold crowns in more prominent teeth such as incisors is favored in some cultures and discouraged in others.
Colloidal gold preparations (suspensions of
gold nanoparticles) in water are intensely red-
colored, and can be made with tightly controlled particle sizes up to a few tens of nanometers across by reduction of gold chloride with
citrate or
ascorbate ions. Colloidal gold is used in research applications in medicine, biology and
materials science. The technique of
immunogold labeling exploits the ability of the gold particles to adsorb protein molecules onto their surfaces. Colloidal gold particles coated with specific antibodies can be used as probes for the presence and position of antigens on the surfaces of cells. In ultrathin sections of tissues viewed by
electron microscopy, the immunogold labels appear as extremely dense round spots at the position of the
antigen. Gold, or alloys of gold and
palladium, are applied as conductive coating to biological specimens and other non-conducting materials such as plastics and glass to be viewed in a
scanning electron microscope. The coating, which is usually applied by
sputtering with an
argon plasma, has a triple role in this application. Gold's very high electrical conductivity drains
electrical charge to earth, and its very high density provides stopping power for electrons in the
electron beam, helping to limit the depth to which the electron beam penetrates the specimen. This improves definition of the position and topography of the specimen surface and increases the
spatial resolution of the image. Gold also produces a high output of
secondary electrons when irradiated by an electron beam, and these low-energy electrons are the most commonly used signal source used in the scanning electron microscope. The isotope
gold-198 (
half-life 2.7 days) is used in
nuclear medicine, in some
cancer treatments and for treating other diseases.
Cuisine Gold can be used in food and has the
E number 175. It can be applied as
gold leaf, flake or dust for decorative purposes. Since metallic gold is generally considered inert to all body chemistry, it has no taste, provides no nutrition, and leaves the body unaltered. In 2016, the
European Food Safety Authority published an opinion on the re-evaluation of gold as a food additive. Concerns included the possible presence of minute amounts of gold
nanoparticles in the food additive, and that gold nanoparticles have been shown to be
genotoxic in mammalian cells
in vitro. Decorative use of gold flake goes back to
medieval Europe as a decoration in food and drinks among nobility. Leaf or flakes are used today in sweets and drinks.
Vark is a foil or leaf composed of a pure metal that can include gold, and is used for
garnishing sweets in South Asian cuisine. Danziger
Goldwasser () is a traditional German herbal
liqueur produced in what is today
Gdańsk,
Poland, and
Schwabach, Germany, and contains flakes of gold leaf. There are also some expensive (~ $1,000, ) cocktails which contain flakes of gold leaf. • Gold is a good reflector of
electromagnetic radiation such as
infrared and
visible light, as well as
radio waves. It is used for the protective coatings on many artificial
satellites, in infrared protective faceplates in thermal-protection suits and astronauts' helmets, and in
electronic warfare planes such as the
EA-6B Prowler. • Gold is used as the reflective layer on some
high-end CDs. • Automobiles may use gold for heat shielding.
McLaren uses gold foil in the engine compartment of its
F1 model. • Gold can be manufactured so thin that it appears semi-transparent. It is used in some aircraft cockpit windows for
de-icing or anti-icing by passing electricity through it. The heat produced by the resistance of the gold is enough to prevent ice from forming. • Gold is attacked by and dissolves in alkaline solutions of potassium or sodium
cyanide, to form the salt gold cyanide—a technique that has been used in extracting metallic gold from ores in the
cyanide process. Gold cyanide is the
electrolyte used in commercial
electroplating of gold onto base metals and
electroforming. • Gold chloride (
chloroauric acid) solutions are used to make colloidal gold by reduction with
citrate or
ascorbate ions. Gold chloride and gold oxide are used to make cranberry or red-colored glass, which, like
colloidal gold suspensions, contains evenly sized spherical
gold nanoparticles. • Gold, when dispersed in nanoparticles, can act as a
heterogeneous catalyst of chemical reactions. • In recent years, gold has been used as a symbol of pride by the
autism rights movement, as its symbol Au could be seen as similar to the word "
autism". == Toxicity ==