Construction The traditional type of
hyperbaric chamber used for therapeutic recompression and HBOT is a rigid shelled
pressure vessel. Such chambers can be run at absolute pressures typically about , or more in special cases. Counterfeit chambers often do not use acrylic windows. • one or more human entry hatchessmall and circular or wheel-in type hatches for patients on
gurneys; • the
entry lock that allows human entrya separate chamber with two hatches, one to the outside and one to the main chamber, which can be independently pressurized to allow patients to enter or exit the main chamber while it is still pressurized; to portable, air inflated "soft" chambers that can operate at between above atmospheric pressure with no supplemental oxygen, and longitudinal zipper closure.
Viewports Acrylic windows with PVHO-1 defined standard geometries and design criteria are generally used. Shapes and sizes vary with chamber application and the requirements for the specific use. The geometries in general use include: • Flat circular windows (low pressure) • Conical edged windows with flat inner and outer faces (high pressure on one side only) • Circular windows with double beveled edges •
Light pipes Low pressure, small diameter chambers may use large cylindrical windows fitted inside the metal structure. In some cases the whole cylindrical pressure chamber has been made from an acrylic tube. The acrylic windows of a hyperbaric chamber have a limited lifespan, which can be expressed as the design life, which is the conservatively estimated life as calculated in the design process, typically about 10 years, and the service life, which is the actual time the window can be safely and legally used when well maintained, properly inspected, and repaired when necessary and possible and which can be as much as twice the design life. There are three grades of inspection required: • Operational inspection of the inner and outer surfaces is included in the checks before first pressurisation of the day by a competent chamber operator, and ensures that the surfaces have not been damaged since the last use. • Maintenance inspection is done at specified intervals by a qualified maintenance inspector. This inspection is more thorough and may require removal of the window from the mounting to check for damage that is not visible when installed. This grade of inspection is generally also required for re-commissioning a chamber that has been out of service for longer than a specified period. • Seat and seal inspection is done whenever a window has been removed for inspection or repair or a new window installed. The window is examined to detect crazing, cracks, blisters, discolouration, scratches or pits.
Operating pressures The operating pressure depends on the application. Chambers used for clinical hyperbaric oxygen therapy commonly have a maximum allowable working pressure of with a maximum of about Chambers used for support of commercial or military diving operations and for research may have a maximum allowable working pressure of up to .
Oxygen supply In the larger multiplace chambers, patients inside the chamber breathe from either "oxygen hoods" – flexible, transparent soft plastic hoods with a seal around the neck similar to a
space suit helmet – or tightly fitting
oxygen masks, which supply pure oxygen and may be designed to directly exhaust the exhaled gas from the chamber. During treatment patients breathe 100% oxygen most of the time to maximise the effectiveness of their treatment, but have periodic "air breaks" during which they breathe chamber air (21% oxygen) to reduce the risk of
oxygen toxicity. The exhaled treatment gas must be removed from the chamber to prevent the buildup of oxygen, which could present a fire risk. Attendants may also breathe oxygen some of the time to reduce their risk of
decompression sickness when they leave the chamber. The pressure inside the chamber is increased by opening valves allowing high-pressure air to enter from
storage cylinders, which are filled by an
air compressor. Chamber air oxygen content is kept between 19% and 23% to control fire risk (US Navy maximum 25%). If the chamber does not have a scrubber system to remove carbon dioxide from the chamber gas, the chamber must be isobarically ventilated to keep the CO2 within acceptable limits. A soft chamber may be pressurized directly from a compressor. or from storage cylinders. Smaller "monoplace" chambers can only accommodate the patient, and no medical staff can enter. The chamber may be pressurised with pure oxygen or compressed air. If pure oxygen is used, no oxygen breathing mask or helmet is needed, but the cost of using pure oxygen is much higher than that of using compressed air. If compressed air is used, then an oxygen mask or hood is needed as in a multiplace chamber. Most monoplace chambers can be fitted with a demand breathing system for air breaks. In low pressure soft chambers, treatment schedules may not require air breaks, because the risk of oxygen toxicity is low due to the lower oxygen partial pressures used (usually 1.3 ATA), and short duration of treatment. For alert, cooperative patients, air breaks provided by mask are more effective than changing the chamber gas because they provide a quicker gas change and a more reliable gas composition both during the break and treatment periods.
Personnel •
Hyperbaric medical practitioner - a specialist in hyperbaric medicine •
Diving medical practitioner – a specialist in diving medicine •
Chamber operator – a person competent to operate a hyperbaric chamber •
Hyperbaric nurse – a nurse responsible for administering hyperbaric oxygen therapy to patients and supervising them throughout the treatment. •
Diving medical technician – member of a dive team who is trained in advanced first aid. •
Chamber attendant – a person trained in basic first aid who is medically fit to dive in a chamber, usually a member of a diving team allocated to looking after the diver being treated. == Treatments ==