Devanagari

is formed by combining the word () with (). is an adjective derived from (), a Sanskrit word meaning "town" or "city", and literally means "urban" or "urbane". The word (implicitly modifying Lipi (script)|, meaning "script") was used independently to refer to a North Indian script, or possibly a group of such scripts, as attested by Al-Biruni in the 11th century. The form is attested later, at least by the 18th century. The name of the Nandināgarī script is also formed by adding a prefix to the generic script name . The precise origin and significance of the prefix - ("heavenly" or "god") remains unclear. == History ==

is part of the Brahmic family of scripts of India, Nepal, Tibet, and Southeast Asia. It is a descendant of the 3rd century BCE Brāhmī script, which evolved into the Nagari script which in turn gave birth to Devanāgarī and Nandināgarī. has been widely adopted across India and Nepal to write Sanskrit, Marathi, Hindi, Central Indo-Aryan languages, Konkani, Boro, and various Nepalese languages. Some of the earliest epigraphic evidence attesting to the developing Sanskrit Nāgarī script in ancient India is from the 1st to 4th century CE inscriptions discovered in Gujarat. Variants of script called , recognisably close to Devanāgarī, are first attested from the 1st century CE Rudradaman inscriptions in Sanskrit, while the modern standardised form of Devanāgarī was in use by about 1000 CE. Medieval inscriptions suggest widespread diffusion of Nāgarī-related scripts, with biscripts presenting local script along with the adoption of scripts. For example, the mid 8th-century Pattadakal pillar in Karnataka has text in both Siddha Matrika script, and an early Telugu-Kannada script; while, the Kangra Jawalamukhi inscription in Himachal Pradesh is written in both Sharada and Devanāgarī scripts. The script was in regular use by the 7th century CE, and it was fully developed by about the end of first millennium. and an inscribed brick found in Uttar Pradesh, dated to be from 1217 CE, which is now held at the British Museum. The script's prototypes and related versions have been discovered with ancient relics outside India, in places such as Sri Lanka, Myanmar and Indonesia. In East Asia, the script (considered as the closest precursor to ) was in use by Buddhists. Nāgarī has been the of the Indic scripts. It has long been used traditionally by religiously educated people in South Asia to record and transmit information, existing throughout the land in parallel with a wide variety of local scripts (such as Moḍī, Kaithi, and Mahajani) used for administration, commerce, and other daily uses. Sharada remained in parallel use in Kashmir. An early version of is visible in the Kutila inscription of Bareilly dated to VS 1049 (992 CE), which demonstrates the emergence of the horizontal bar to group letters belonging to a word. One of the oldest surviving Sanskrit texts from the early post-Maurya period consists of 1,413 pages of a commentary by Patanjali, with a composition date of about 150 BCE, the surviving copy transcribed about 14th century CE. In Sinja Valley, mid-western Nepal where the Nepali language originates from, the earliest examples of the Devanagari script from the 13th century were found on the cliffs and in nearby Dullu. East Asia In the 7th century, under the rule of Songtsen Gampo of the Tibetan Empire, Thonmi Sambhota was sent to Nepal to open marriage negotiations with a Nepali princess and to find a writing system suitable for the Tibetan language. He then invented the Tibetan script based on the Nāgarī used in Kashmir. He added 6 new characters for sounds that did not exist in Sanskrit. Other scripts closely related to Nāgarī (such as Siddhaṃ) were introduced throughout East and Southeast Asia from the 7th to the 10th centuries CE: notably in Indonesia, Vietnam, and Japan. Most of the Southeast Asian scripts have roots in Dravidian scripts, but a few found in south-central regions of Java and isolated parts of southeast Asia resemble Devanāgarī or its prototypes. The Kawi script in particular is similar to the Devanāgarī in many respects, though the morphology of the script has local changes. The earliest inscriptions in the Devanāgarī-like scripts are from around the 10th century CE, with many more between the 11th and 14th centuries. Some of the old-Devanāgarī inscriptions are found in Hindu temples of Java, such as the Prambanan temple. The Ligor and the Kalasan inscriptions of central Java, dated to the 8th century, are also in the Nāgarī script of north India. According to the epigraphist and Asian Studies scholar Lawrence Briggs, these may be related to the 9th century copper plate inscription of Devapaladeva (Bengal) which is also in early Devanāgarī script. The term kawi in Kawi script is a loan word from (poetry). According to anthropologists and Asian studies scholars John Norman Miksic and Goh Geok Yian, the 8th century version of early Nāgarī or Devanāgarī script was adopted in Java, Bali, and Khmer around the 8th–9th centuries, as evidenced by the many contemporaneous inscriptions of this period. == Letters ==

The letter order of Devanāgarī, like nearly all Brāhmic scripts, is based on phonetic principles that consider both the manner and place of articulation of the consonants and vowels they represent. This arrangement is usually referred to as the ("garland of letters"). The format of Devanāgarī for Sanskrit serves as the prototype for its application, with minor variations or additions, to other languages. The name "Devanagari" comes from the Sanskrit term (), meaning "script of the divine city" or "script of the city of God". The vowels and their arrangement are: • Arranged with the vowels are two consonantal diacritics, the final nasal and the final fricative (called and ). notes of the in Sanskrit that "there is some controversy as to whether it represents a homorganic nasal stop , a nasalised vowel, a nasalised semivowel, or all these according to context". The represents post-vocalic voiceless glottal fricative , in Sanskrit an allophone of , or less commonly , usually in word-final position. Some traditions of recitation append an echo of the vowel after the breath: . considers the along with letters and for the "largely predictable" velar and palatal nasals to be examples of "phonetic overkill in the system". • Another diacritic is the / . describes it as a "more emphatic form" of the , "sometimes used to mark a true [vowel] nasalization". In a new Indo-Aryan language such as Hindi the distinction is formal: the indicates vowel nasalisation while the indicates a homorganic nasal preceding another consonant: e.g., "laughter", "the Ganges". When an has a vowel diacritic above the top line, that leaves no room for the ("moon") stroke , which is dispensed with in favour of the lone dot: "am", but "are". Some writers and typesetters dispense with the "moon" stroke altogether, using only the dot in all situations. • The virāma or halanta diacritic ् expresses the absence of a vowel after the consonant, e.g. क्‌ष can represent kṣa. • The ( ) (usually transliterated with an apostrophe) is a Sanskrit punctuation mark for the elision of a vowel in sandhi: ( ← + ) ("this one"). An original long vowel lost to coalescence is sometimes marked with a double : ( ← + ) "always, the self". In Hindi, states that its "main function is to show that a vowel is sustained in a cry or a shout": . In Madhyadeshi languages like Bhojpuri, Awadhi, Maithili, etc. which have "quite a number of verbal forms that end in that inherent vowel", the is used to mark the non-elision of word-final inherent , which otherwise is a modern orthographic convention: "sit" versus • The sound represented by has largely been lost in the modern languages, and its pronunciation now ranges from (Hindi) to (Marathi). • The syllabic consonants , , and are specific to Sanskrit and not included in the of other languages. • is not an actual phoneme of Sanskrit, but rather a graphic convention included among the vowels in order to maintain the symmetry of short–long pairs of letters. IAST transliteration is not defined. In ISO 15919, the transliteration is and , respectively. • Kashmiri Devanagari uses letters like , , , , , , , to represent its vowels (see Kashmiri language#Devanagari). Consonants The table below shows the consonant letters (in combination with inherent vowel ) and their arrangement. To the right of the Devanāgarī letter it shows the Latin script transliteration using International Alphabet of Sanskrit Transliteration, and the phonetic value (IPA) in Hindi. • Additionally, there is (IPA: or ), the intervocalic lateral flap allophone of the voiced retroflex stop in Vedic Sanskrit, which is a phoneme in languages such as Marathi, Konkani, Garhwali, and Rajasthani. • Beyond the Sanskritic set, new shapes have rarely been formulated. offers the following, "In any case, according to some, all possible sounds had already been described and provided for in this system, as Sanskrit was the original and perfect language. Hence it was difficult to provide for or even to conceive other sounds, unknown to the phoneticians of Sanskrit (The phoneticians did describe certain sounds qua sounds — bilabial fricatives, for instance — which, being either sporadic or completely predictable, were never represented in the writing system.)". Where foreign borrowings and internal developments did inevitably accrue and arise in New Indo-Aryan languages, they have been ignored in writing or dealt through means such as diacritics and ligatures (ignored in recitation). • The most prolific diacritic has been the subscript dot () . Hindi uses it for the Persian, Arabic and English sounds /q/, /x/, /ɣ/, /z/, /ʒ/, and /f/, and for the allophonic developments /ɽ/ and . (Although could also exist, it is not used in Hindi.) • Devanagari used to write Mahl dialect of Dhivehi uses nukta on , , , , , , to represent other Perso-Arabic phonemes (see Maldivian writing systems#Devanagari script for Mahl). • Sindhi's and Saraiki's implosives are accommodated with a line attached below: , , , . • Aspirated sonorants may be represented as conjuncts/ligatures with : , , , , , , . • notes Marwari as using for (while represents ). • When used to write Avestan, Devanagari uses letters like /ʒ/ to represent its sounds. Vowel diacritics The table below shows the syllabic letter () modified by common dependent vowel marks and diacritics, with the ISO 15919 transliterations for each combination. Vowels in their independent form (without a consonant) are on the top, and in their corresponding dependent form (vowel diacritic) combined with the consonant on the bottom. The table begins with without any added vowel mark, where the vowel '' is inherent. A vowel combines with a consonant in their diacritic form. For example, the vowel () combines with the consonant () to form the syllabic letter (), with Halanta| (cancel sign) removed and added vowel sign which is indicated by diacritics. The vowel () combines with the consonant () to form () with removed. But the diacritic series of , , , (, respectively) is without any added vowel sign, as the vowel () is inherent. '', dated to 1290 CE. It is in written in Marathi using the Devanāgarī script. The combinations of all Sanskrit consonants and vowels, each in alphabetical order, are laid out in the () or () table. In the following table, the IAST transliteration of each combination will appear on mouseover: Old forms . The following letter variants are also in use, particularly in older texts and in specific regions: Conjunct consonants (1846). As mentioned, successive consonants lacking a vowel in between them may physically join as a conjunct consonant or ligature. When Devanāgarī is used for writing languages other than Sanskrit, conjuncts are used mostly with Sanskrit words and loan words. Native words typically use the basic consonant and native speakers know to suppress the vowel when it is conventional to do so. For example, the native Hindi word is written (). The government of these clusters ranges from widely to narrowly applicable rules, with special exceptions within. While standardised for the most part, there are certain variations in clustering, of which the Unicode used on this page is just one scheme. The following are a number of rules: • 24 out of the 36 consonants contain a vertical right stroke ( , , etc.). As first or middle fragments/members of a cluster (when letters are to be written as half pronounced), they lose that stroke. e.g. + = , + = , + = . In Unicode, as in Hindi, these consonants without their vertical stems are called "half forms". appears as a different, simple ribbon-shaped fragment preceding , , , , and , causing these second members to be shifted down and reduced in size. Thus , , , , , and . • as a first member takes the form of a curved upward dash above the final character or its diacritic. e.g. , , , . In Marathi and Nepali, as a first member of a conjunct also takes on an eyelash form when in front of glides and semivowels. e.g. , . As a final member with , , , , , , it is two lines together below the character pointed downwards. Thus , , , , , . Elsewhere as a final member it is a diagonal stroke extending leftwards and down. e.g. . is shifted up to make the conjunct . • As first members, remaining characters lacking vertical strokes such as and may have their second member, reduced in size and lacking its horizontal stroke, placed underneath. , , and shorten their right hooks and join them directly to the following member. • The conjuncts for and are not clearly derived from the letters making up their components. The conjunct for is ( + ) and for it is ( + ). Accent marks The pitch accent of Vedic Sanskrit is written with various symbols depending on shakha. In the Rigveda, is written with a bar below the line (), with a stroke above the line () while is unmarked. Punctuation The end of a sentence or half-verse may be marked with the "" symbol (called a , meaning "bar", or called a , meaning "full stop/pause"). The end of a full verse may be marked with a double-, a "" symbol. A comma (called an '''', meaning "short stop/pause") is used to denote a natural pause in speech. Punctuation marks of Western origin, such as the colon, semicolon, exclamation mark, dash, and question mark have been in use in Devanāgarī script since at least the 1900s, matching their use in European languages. Fonts A variety of computer fonts are in use for Devanāgarī. These include Akshar, Annapurna, Arial, CDAC-Gist Surekh, CDAC-Gist Yogesh, Chandas, Gargi, Gurumaa, Jaipur, Jana, Kalimati, Kanjirowa, Lohit Devanagari, Mangal, Kokila, ,Preeti, Raghu, Sanskrit2003, Santipur OT, Siddhanta, and Thyaka. The form of Devanāgarī fonts vary with function. According to Harvard College for Sanskrit studies: The Google Fonts project has a number of typefaces for Devanāgarī in a variety of fonts in serif, sans-serif, display and handwriting categories. == Numerals ==

There are several methods of Romanisation or transliteration from Devanāgarī to the Roman script. Hunterian system The Hunterian system is the national system of romanisation in India, officially adopted by the Government of India. ISO 15919 A standard transliteration convention was codified in the ISO 15919 standard of 2001. It uses diacritics to map the much larger set of Brāhmic graphemes to the Latin script. The Devanāgarī-specific portion is nearly identical to the academic standard for Sanskrit, IAST. The National Library at Kolkata romanisation, intended for the romanisation of all Indic scripts, is an extension of IAST. Harvard-Kyoto Compared to IAST, Harvard-Kyoto looks much simpler. It does not contain all the diacritic marks that IAST contains. It was designed to simplify the task of putting large amount of Sanskrit textual material into machine readable form, and the inventors stated that it reduces the effort needed in transliteration of Sanskrit texts on the keyboard. Velthuis The disadvantage of the above ASCII schemes is case-sensitivity, implying that transliterated names may not be capitalised. This difficulty is avoided with the system developed in 1996 by Frans Velthuis for TeX, loosely based on IAST, in which case is irrelevant. ALA-LC Romanisation ALA-LC romanisation is a transliteration scheme approved by the Library of Congress and the American Library Association, and widely used in North American libraries. Transliteration tables are based on languages, so there is a table for Hindi, one for Sanskrit and Prakrit, etc. WX WX is a Roman transliteration scheme for Indian languages, widely used among the natural language processing community in India. It originated at IIT Kanpur for computational processing of Indian languages. The salient features of this transliteration scheme are as follows. • Every consonant and every vowel has a single mapping into Roman. Hence it is a prefix code, advantageous from computation point of view. • Lower-case letters are used for unaspirated consonants and short vowels, while capital letters are used for aspirated consonants and long vowels. While the retroflex stops are mapped to 't, T, d, D, N', the dentals are mapped to 'w, W, x, X, n'. Hence the name 'WX', a reminder of this idiosyncratic mapping. == Encodings ==

ISCII ISCII is an 8-bit encoding. The lower 128 codepoints are plain ASCII, the upper 128 codepoints are ISCII-specific. It has been designed for representing not only Devanāgarī but also various other Indic scripts as well as a Latin-based script with diacritic marks used for transliteration of the Indic scripts. ISCII has largely been superseded by Unicode, which has, however, attempted to preserve the ISCII layout for its Indic language blocks. Unicode The Unicode Standard defines four blocks for Devanāgarī: Devanagari (U+0900–U+097F), Devanagari Extended (U+A8E0–U+A8FF), Devanagari Extended-A (U+11B00–11B5F), and Vedic Extensions (U+1CD0–U+1CFF). == Devanāgari keyboard layouts ==

InScript layout InScript is the standard keyboard layout for Devanāgarī as standardized by the Government of India. It is inbuilt in all modern major operating systems. Microsoft Windows supports the InScript layout, which can be used to input unicode Devanāgarī characters. InScript is also available in some touchscreen mobile phones. Typewriter This layout was used on manual typewriters when computers were not available or were uncommon. For backward compatibility some typing tools like Indic IME still provide this layout. Phonetic ) or "" (Inscript) typing options to search or edit Devanagari-script articles as shown in this video clip example. CC instructions are available for British English. Such tools work on phonetic transliteration. The user writes in the Latin alphabet and the IME automatically converts it into Devanāgarī. Some popular phonetic typing tools are Akruti, Baraha IME and Google IME. The Mac OS X operating system includes two different keyboard layouts for Devanāgarī: one resembles the INSCRIPT/KDE Linux, while the other is a phonetic layout called "Devanāgarī QWERTY". Any one of the Unicode fonts input systems is fine for the Indic language Wikipedia and other wikiprojects, including Hindi, Bhojpuri, Marathi, and Nepali Wikipedia. While some people use InScript, the majority uses either Google phonetic transliteration or the input facility Universal Language Selector provided on Wikipedia. On Indic language wikiprojects, the phonetic facility provided initially was java-based, and was later supported by Narayam extension for phonetic input facility. Currently Indic language Wiki projects are supported by Universal Language Selector (ULS), that offers both phonetic keyboard (Aksharantaran, Marathi: , Hindi: ) and InScript keyboard (Marathi: ). The Ubuntu Linux operating system supports several keyboard layouts for Devanāgarī, including Harvard-Kyoto, WX notation, Bolanagari and phonetic. The 'remington' typing method in Ubuntu IBUS is similar to the Krutidev typing method, popular in Rajasthan. The 'itrans' method is useful for those who know English (and the English keyboard) well but are not familiar with typing in Devanāgarī. == See also ==