Civilization has historically flourished around rivers and major waterways;
Mesopotamia, one of the so-called
cradles of civilization, was situated between the major rivers
Tigris and
Euphrates; the ancient society of the
Egyptians depended entirely upon the
Nile. The early
Indus Valley civilization () developed along the Indus River and tributaries that flowed out of the
Himalayas.
Rome was also founded on the banks of the Italian river
Tiber. Large
metropolises like
Rotterdam, London, Montreal, Paris, New York City,
Buenos Aires, Shanghai, Tokyo, Chicago, and Hong Kong owe their success in part to their easy accessibility via water and the resultant expansion of trade. Islands with safe water ports, like Singapore, have flourished for the same reason. In places such as North Africa and the Middle East, where water is more scarce, access to clean drinking water was and is a major factor in human development.
Health and pollution sampling water Water fit for human consumption is called
drinking water or potable water. Water that is not potable may be made potable by filtration or
distillation, or by a range of
other methods. More than 660 million people do not have access to safe drinking water. Water that is not fit for drinking but is not harmful to humans when used for swimming or bathing is called by various names other than potable or drinking water, and is sometimes called
safe water, or "safe for bathing". Chlorine is a skin and mucous membrane irritant that is used to make water safe for bathing or drinking. Its use is highly technical and is usually monitored by government regulations (typically 1 part per million (ppm) for drinking water, and 1–2 ppm of chlorine not yet reacted with impurities for bathing water). Water for bathing may be maintained in satisfactory microbiological condition using chemical disinfectants such as
chlorine or
ozone or by the use of
ultraviolet light.
Water reclamation is the process of converting wastewater (most commonly
sewage, also called municipal wastewater) into water that can be
reused for other purposes. There are 2.3 billion people who reside in nations with water scarcities, which means that each individual receives less than of water annually. of municipal wastewater are produced globally each year. Freshwater is a renewable resource, recirculated by the natural
hydrologic cycle, but pressures over access to it result from the naturally uneven distribution in space and time, growing economic demands by agriculture and industry, and rising populations. Currently, nearly a billion people around the world lack access to safe, affordable water. In 2000, the United Nations established the
Millennium Development Goals for water to halve by 2015 the proportion of people worldwide without access to safe water and
sanitation. Progress toward that goal was uneven, and in 2015 the UN committed to the
Sustainable Development Goals of achieving universal access to safe and affordable water and sanitation by 2030. Poor
water quality and bad sanitation are deadly; some five million deaths a year are caused by water-related diseases. The
World Health Organization estimates that
safe water could prevent 1.4 million child deaths from
diarrhea each year. In developing countries, 90% of all
municipal wastewater still goes untreated into local rivers and streams. Some 50 countries, with roughly a third of the world's population, also suffer from medium or high
water scarcity and 17 of these extract more water annually than is recharged through their natural water cycles. The strain not only affects surface freshwater bodies like rivers and lakes, but it also degrades groundwater resources.
Human uses Agriculture The most substantial human use of water is for agriculture, including irrigated agriculture, which accounts for as much as 80 to 90 percent of total human water consumption. In the United States, 42% of freshwater withdrawn for use is for irrigation, but the vast majority of water "consumed" (used and not returned to the environment) goes to agriculture. Access to fresh water is often taken for granted, especially in developed countries that have built sophisticated water systems for collecting, purifying, and delivering water, and removing wastewater. But growing economic, demographic, and climatic pressures are increasing concerns about water issues, leading to increasing competition for fixed water resources, giving rise to the concept of
peak water. As populations and economies continue to grow, consumption of water-thirsty meat expands, and new demands rise for biofuels or new water-intensive industries, new water challenges are likely. An assessment of water management in agriculture was conducted in 2007 by the
International Water Management Institute in Sri Lanka to see if the world had sufficient water to provide food for its growing population. It assessed the current availability of water for agriculture on a global scale and mapped out locations suffering from water scarcity. It found that a fifth of the world's people, more than 1.2 billion, live in areas of
physical water scarcity, where there is not enough water to meet all demands. A further 1.6 billion people live in areas experiencing
economic water scarcity, where the lack of investment in water or insufficient human capacity make it impossible for authorities to satisfy the demand for water. The report found that it would be possible to produce the food required in the future, but that continuation of today's food production and environmental trends would lead to crises in many parts of the world. To avoid a global water crisis, farmers will have to strive to increase productivity to meet growing demands for food, while industries and cities find ways to use water more efficiently. Water scarcity is also caused by production of water intensive products. For example, cotton: 1 kg of cotton—equivalent of a pair of jeans—requires water to produce. While cotton accounts for 2.4% of world water use, the water is consumed in regions that are already at a risk of water shortage. Significant environmental damage has been caused: for example, the diversion of water by the former
Soviet Union from the
Amu Darya and
Syr Darya rivers to produce cotton was largely responsible for the disappearance of the
Aral Sea. File:Water requirement per tonne of food product, OWID.svg|Water requirement per tonne of food product File:Subsurface drip emission on loamy soil.ogv|Water distribution in subsurface
drip irrigation File:SiphonTubes.JPG|
Irrigation of field crops
As a scientific standard On 7 April 1795, the gram was defined in France to be equal to "the absolute weight of a volume of pure water equal to a cube of one-hundredth of a meter, and at the temperature of melting ice". For practical purposes though, a metallic reference standard was required, one thousand times more massive, the kilogram. Work was therefore commissioned to determine precisely the mass of one liter of water. In spite of the fact that the decreed definition of the gram specified water at —a highly reproducible
temperature—the scientists chose to redefine the standard and to perform their measurements at the temperature of highest water
density, which was measured at the time as . The
Kelvin temperature scale of the
SI system was based on the
triple point of water, defined as exactly , but as of May 2019 is based on the
Boltzmann constant instead. The scale is an
absolute temperature scale with the same increment as the Celsius temperature scale, which was originally defined according to the
boiling point (set to ) and
melting point (set to ) of water. Natural water consists mainly of the isotopes hydrogen-1 and oxygen-16, but there is also a small quantity of heavier isotopes oxygen-18, oxygen-17, and hydrogen-2 (
deuterium). The percentage of the heavier isotopes is very small, but it still affects the properties of water. Water from rivers and lakes tends to contain less heavy isotopes than seawater. Therefore, standard water is defined in the
Vienna Standard Mean Ocean Water specification.
For drinking The
human body contains, on average, 50–60% water, depending on age, gender and body size, although individuals may have anywhere between 45% and 75%. The
U.S. National Academies of Sciences, Engineering, and Medicine recommends a daily intake of of water for adult men and for women. Medical literature favors a lower consumption, typically 1 liter of water for an average male, excluding extra requirements due to fluid loss from exercise or warm weather. Healthy kidneys can excrete 0.8 to 1 liter of water per hour, but stress such as exercise can reduce this amount. People can drink far more water than necessary while exercising, putting them at risk of
water intoxication (hyperhydration), which can be fatal. The popular claim that "a person should consume eight glasses of water per day" seems to have no real basis in science. Studies have shown that extra water intake, especially up to at mealtime, was associated with weight loss. Adequate fluid intake is helpful in preventing constipation. for non-potable water An original recommendation for water intake in 1945 by the Food and Nutrition Board of the
U.S. National Research Council read: "An ordinary standard for diverse persons is 1 milliliter for each calorie of food. Most of this quantity is contained in prepared foods." The latest dietary reference intake report by the U.S. National Research Council in general recommended, based on the median total water intake from US survey data (including food sources): for men and of water total for women, noting that water contained in food provided approximately 19% of total water intake in the survey. Specifically, pregnant and breastfeeding women need additional fluids to stay hydrated. The US
Institute of Medicine recommends that, on average, men consume and women ; pregnant women should increase intake to and breastfeeding women should get 3 liters (12 cups), since an especially large amount of fluid is lost during nursing. Also noted is that normally, about 20% of water intake comes from food, while the rest comes from drinking water and beverages (
caffeinated included). Water is excreted from the body in multiple forms; through
urine and
feces, through
sweating, and by exhalation of water vapor in the breath. With physical exertion and heat exposure, water loss will increase and daily fluid needs may increase as well. Humans require water with few impurities. Common impurities include metals like copper and lead; chemical compounds such as
pesticides,
PFAS, or
bleach; Some
solutes are acceptable and even desirable for taste enhancement and to provide needed
electrolytes. The single largest (by volume) freshwater resource suitable for drinking is
Lake Baikal in Siberia.
Washing Transportation Chemical uses Water is widely used in chemical reactions as a
solvent or
reactant and less commonly as a
solute or catalyst. In inorganic reactions, water is a common solvent, dissolving many ionic compounds, as well as other polar compounds such as
ammonia and
compounds closely related to water. In organic reactions, it is not usually used as a reaction solvent, because it does not dissolve the reactants well and is
amphoteric (acidic
and basic) and
nucleophilic. Nevertheless, these properties are sometimes desirable. Also, acceleration of
Diels-Alder reactions by water has been observed.
Supercritical water has recently been a topic of research. Oxygen-saturated supercritical water combusts organic pollutants efficiently.
Heat exchange Water and steam are a common fluid used for
heat exchange, due to its availability and high
heat capacity, both for cooling and heating. Cool water may even be naturally available from a lake or the sea. It is especially effective to transport heat through
vaporization and
condensation of water because of its large
latent heat of vaporization. A disadvantage is that metals commonly found in industries such as steel and copper are
oxidized faster by untreated water and steam. In almost all
thermal power stations, water is used as the working fluid (used in a closed-loop between boiler, steam turbine, and condenser), and the coolant (used to exchange the waste heat to a water body or carry it away by
evaporation in a
cooling tower). In the United States, cooling power plants is the largest use of water. In the
nuclear power industry, water can also be used as a
neutron moderator. In most
nuclear reactors, water is both a coolant and a moderator. This provides something of a passive safety measure, as removing the water from the reactor also
slows the nuclear reaction down. However other methods are favored for stopping a reaction and it is preferred to keep the nuclear core covered with water so as to ensure adequate cooling.
Fire considerations wildfires. Water has a high heat of vaporization and is relatively inert, which makes it a good
fire extinguishing fluid. The evaporation of water carries heat away from the fire. It is dangerous to use water on fires involving oils and organic solvents because many organic materials float on water and the water tends to spread the burning liquid. Use of water in fire fighting should also take into account the hazards of a
steam explosion, which may occur when water is used on very hot fires in confined spaces, and of a hydrogen explosion, when substances which react with water, such as certain metals or hot carbon such as coal,
charcoal, or
coke graphite, decompose the water, producing
water gas. The power of such explosions was seen in the
Chernobyl disaster, although the water involved in this case did not come from fire-fighting but from the reactor's own water cooling system. A steam explosion occurred when the extreme overheating of the core caused water to flash into steam. A hydrogen explosion may have occurred as a result of a reaction between steam and hot
zirconium. Some metallic oxides, most notably those of
alkali metals and
alkaline earth metals, produce so much heat in reaction with water that a fire hazard can develop. The alkaline earth oxide
quicklime, also known as calcium oxide, is a mass-produced substance that is often transported in paper bags. If these are soaked through, they may ignite as their contents react with water.
Recreation , Colombia Humans use water for many recreational purposes, as well as for exercising and for sports. Some of these include swimming,
waterskiing,
boating,
surfing and
diving. In addition, some sports, like
ice hockey and
ice skating, are played on ice. Lakesides, beaches and
water parks are popular places for people to go to relax and enjoy recreation. Many find the sound and appearance of flowing water to be calming, and fountains and other flowing water structures are popular decorations. Some keep fish and other flora and fauna inside
aquariums or ponds for show, fun, and companionship. Humans also use water for snow sports, such as
skiing,
sledding,
snowmobiling or
snowboarding, which require the water to be at a low temperature either as ice or crystallized into snow.
Water industry The
water industry provides drinking water and
wastewater services (including
sewage treatment) to households and industry.
Water supply facilities include
water wells,
cisterns for
rainwater harvesting,
water supply networks, and
water purification facilities,
water tanks,
water towers,
water pipes including old
aqueducts.
Atmospheric water generators are in development. Drinking water is often collected at
springs, extracted from artificial
borings (wells) in the ground, or pumped from lakes and rivers. Building more wells in adequate places is thus a possible way to produce more water, assuming the aquifers can supply an adequate flow. Other water sources include rainwater collection. Water may require purification for human consumption. This may involve the removal of undissolved substances, dissolved substances and harmful
microbes. Popular methods are
filtering with sand which only removes undissolved material, while
chlorination and
boiling kill harmful microbes.
Distillation does all three functions. More advanced techniques exist, such as
reverse osmosis.
Desalination of abundant
seawater is a more expensive solution used in coastal
arid climates. The distribution of drinking water is done through
municipal water systems, tanker delivery or as
bottled water. Governments in many countries have programs to distribute water to the needy at no charge. Reducing usage by using drinking (potable) water only for human consumption is another option. In some cities such as Hong Kong, seawater is extensively used for flushing toilets citywide to
conserve freshwater resources.
Polluting water may be the biggest single misuse of water; to the extent that a pollutant limits other uses of the water, it becomes a waste of the resource, regardless of benefits to the polluter. Like other types of pollution, this does not enter standard accounting of market costs, being conceived as
externalities for which the market cannot account. Thus other people pay the price of water pollution, while the private firms' profits are not redistributed to the local population, victims of this pollution.
Pharmaceuticals consumed by humans often end up in the waterways and can have detrimental effects on
aquatic life if they
bioaccumulate and if they are not
biodegradable. Municipal and
industrial wastewater are typically treated at
wastewater treatment plants. Mitigation of polluted
surface runoff is addressed through a variety of
prevention and treatment techniques.
Industrial applications Many industrial processes rely on reactions using chemicals dissolved in water, suspension of solids in water
slurries or using water to dissolve and extract substances, or to wash products or process equipment. Processes such as mining,
chemical pulping,
pulp bleaching,
paper manufacturing, textile production, dyeing, printing, and cooling of power plants use large amounts of water, requiring a dedicated water source, and often cause significant water pollution. Water is used in
power generation.
Hydroelectricity is electricity obtained from
hydropower. Hydroelectric power comes from water driving a water turbine connected to a generator. Hydroelectricity is a low-cost, non-polluting, renewable energy source. The energy is supplied by the motion of water. Typically a dam is constructed on a river, creating an artificial lake behind it. Water flowing out of the lake is forced through turbines that turn generators. Pressurized water is used in
water blasting and
water jet cutters. High pressure water guns are used for precise cutting. It works very well, is relatively safe, and is not harmful to the environment. It is also used in the cooling of machinery to prevent overheating, or prevent saw blades from overheating. Water is also used in many industrial processes and machines, such as the
steam turbine and
heat exchanger, in addition to its use as a chemical
solvent. Discharge of untreated water from industrial uses is
pollution. Pollution includes discharged solutes (chemical pollution) and discharged coolant water (
thermal pollution). Industry requires pure water for many applications and uses a variety of purification techniques both in water supply and discharge. The digital sector, especially
Artificial intelligence use large amount of water, so AI expansion can "threaten global and national water security".
Food processing .
Boiling,
steaming, and
simmering are popular cooking methods that often require immersing food in water or its gaseous state, steam. Water is also used for
dishwashing. Water also plays many critical roles within the field of
food science.
Solutes such as salts and sugars found in water affect the physical properties of water. The boiling and freezing points of water are affected by solutes, as well as
air pressure, which is in turn affected by altitude. Water boils at lower temperatures with the lower air pressure that occurs at higher elevations. One
mole of sucrose (sugar) per kilogram of water raises the boiling point of water by , and one mole of salt per kg raises the boiling point by ; similarly, increasing the number of dissolved particles lowers water's freezing point. Solutes in water also affect water activity that affects many chemical reactions and the growth of microbes in food. Water activity can be described as a ratio of the vapor pressure of water in a solution to the vapor pressure of pure water. or less than 60 mg/L (US). According to a report published by the Water Footprint organization in 2010, a single kilogram of beef requires of water; however, the authors also make clear that this is a global average and circumstantial factors determine the amount of water used in beef production.
Medical use Water for injection is on the
World Health Organization's
list of essential medicines. ==Distribution in nature==